2013年12月30日星期一

無料にHPのHP2-K34認定試験を更新する

HPのHP2-K34は専門知識と情報技術の検査として認証試験で、JPexamはあなたに一日早くHPの認証試験に合格させて、多くの人が大量の時間とエネルギーを費やしても無駄になりました。JPexamにその問題が心配でなく、わずか20時間と少ないお金をを使って楽に試験に合格することができます。JPexamは君に対して特別の訓練を提供しています。

JPexamのHP2-K34問題集を入手してから、非常に短い時間で試験に準備しても、あなたは順調に試験に合格することができます。JPexamの問題集には、実際の試験に出る可能性がある問題が全部含まれていますから、問題集における問題を覚える限り、簡単に試験に合格することができます。これは試験に合格する最速のショートカットです。仕事に忙しいから試験の準備をする時間はあまりないとしたら、絶対JPexamのHP2-K34問題集を見逃すことはできないです。これはあなたがHP2-K34試験に合格できる最善で、しかも唯一の方法ですから。

もし君がHPのHP2-K34に参加すれば、良い学習のツルを選ぶすべきです。HPのHP2-K34認定試験はIT業界の中でとても重要な認証試験で、合格するために良い訓練方法で準備をしなければなりません。。

あなたは弊社の商品を買ったら一年間に無料でアップサービスが提供された認定試験に合格するまで利用しても喜んでいます。もしテストの内容が変われば、すぐにお客様に伝えます。弊社はあなた100%合格率を保証いたします。

JPexamの問題集はIT専門家がHPのHP2-K34認証試験について自分の知識と経験を利用して研究したものでございます。JPexamの問題集は真実試験の問題にとても似ていて、弊社のチームは自分の商品が自信を持っています。JPexamが提供した商品をご利用してください。もし失敗したら、全額で返金を保証いたします。

試験番号:HP2-K34問題集
試験科目:Supporting and Servicing HP 3PAR StoreServ Solutions
最近更新時間:2013-12-30
問題と解答:全55問
100%の返金保証。1年間の無料アップデート。

JPexamは毎日24時間オンラインに顧客に対してサービスを提供するアフターサービスはとても良いサイトでございます。最新な情報を1年間に無料にアップデートしております。少ないお金をかかって、一回に合格しましょう。JPexamの問題集は最大のお得だね!

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/HP2-K34_exam.html

NO.1 You are discussing solutions with a customer who wants to use Peer Motion on the HP 3PAR
StoreServ 7400. The customer inquires about the specific requirements and limitations of this
solution. What should you tell them to consider?
A. A maximum of 150 Peer Motion migration tasks can be created by PMM, but only nine of them
run in parallel; the task moves region by region.
B. The destination array requires two free FC ports for Peer Motion: one port in peer mode to
connect to the source array and one to connect to the host that owns the VLUNs that will be
migrated.
C. Volumes in a 3PAR domain on the source array will be placed in the same domain on the
destination array
D. Peer Motion acts as a host-based volume-mirroring solution and requires a license installed on
the source and on the destination array.
Answer: B

HP   HP2-K34   HP2-K34   HP2-K34   HP2-K34

NO.2 Which situation prevents you from using SmartStart to install an HP 3PAR StoreServ 7000
system at a customer site?
A. DHCP is not running in the customer environment
B. The customer will not allow remote access of the Service Processor
C. The controller nodes and the service processor are connected to the same network.
D. All the customer servers are running Windows 2008 R2.
Answer: D

HP   HP2-K34参考書   HP2-K34   HP2-K34   HP2-K34

NO.3 As a consultant, you are configuring Peer Motion during an initial setup of the HP 3PAR
StoreServ systems. What must you consider to ensure the correct configuration of a Peer Motion
environment?
A. Executing the Peer Motion Manager script requires Browse user-rights for the accounts used to
log in to the source array and Super user-rights for the destination array.
B. Two FC switches are required; only fabric connections on initiator ports are supported, and the
host and source system must use the same IP protocol version.
C. The Peer Motion Manager script executes in a command window of Microsoft Windows running
on a Peer Motion Manager Server.
D. The WWN of the VLUNs imported to the new array will become the S/N of the legacy array.
Answer: C

HP認証試験   HP2-K34問題集   HP2-K34練習問題   HP2-K34参考書

NO.4 Which HP resource can be used to obtain the latest information on operating system support
in an
HP 3PAR Storage System environment?
A. HP Single Point of Connectivity Knowledge
B. HP 3PAR Storage System Information Library
C. HP Product Bulletin
D. HP Active Answers
Answer: A

HP過去問   HP2-K34過去問   HP2-K34練習問題
Reference:http://h18000.www1.hp.com/products/quickspecs/14433_na/14433_na.pdf(page 3, see
the text in blue)

NO.5 When using notification settings in Service Tools and Technical Support (STaTS). Which task
can you perform with Symptom?
A. Disable a specific notification
B. Enable a specific notification
C. Create a notification record.
D. Manage a set of notifications.
Answer: C

HP問題集   HP2-K34参考書   HP2-K34認定試験   HP2-K34
Reference:http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03606505 /c036065
0 5.pdf(page 11)

NO.6 Which statement is correct about using the Guided Maintenance (GM) scripts on an HP 3PAR
StoreServ system?
A. The GM scripts have to be run on a 3PARsvc to replace the drive chassis midplane.
B. The Service Processor and node clock battery cannot be removed and replaced by using the GM
scripts.
C. The GM scripts have to be run on a 3PARsvc to replace the Service Processor.
D. The Controller Node and drive cage cannot be removed and replaced by using the GM scripts.
Answer: D

HP認証試験   HP2-K34   HP2-K34練習問題   HP2-K34認定証   HP2-K34認定試験

NO.7 Which zoning rule must be followed to implement Remote Copy over Fibre Channel?
A. Every FC port used for Remote Copy should be zoned with the hosts whose LUNs are replicating.
B. All FC ports on odd nodes should be zoned with the FC ports on the even remote node.
C. A Remote Copy FC port should be zoned to only one other Remote Copy FC port on another
system.
D. All Remote Copy FC ports in a storage server should be placed in the same zone.
Answer: D

HP過去問   HP2-K34   HP2-K34   HP2-K34   HP2-K34   HP2-K34認定証

NO.8 You are running the SmartStart Installation procedure to install an HP StoreServ 7400 Storage
System. Which users, created during the installation process, will have access to this storage system?
(Select two.)
A. 3paradm
B. 3parcust
C. 3parAO
D. 3parSP
E. 3PARrm
Answer: A,B

HP認定試験   HP2-K34認証試験   HP2-K34認定試験   HP2-K34   HP2-K34
Reference:http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03606526 /c036065
2 6.pdf(search for 3paradm and 3parcust)

JPexamは最新の646-206問題集と高品質のMB5-705問題と回答を提供します。JPexamのHH0-240 VCEテストエンジンとC_TFIN52_64試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の156-215.13 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/HP2-K34_exam.html

没有评论:

发表评论