EMCのE22-275認定試験に受かるのはあなたの技能を検証することだけでなく、あなたの専門知識を証明できて、上司は無駄にあなたを雇うことはしないことの証明書です。当面、IT業界でEMCのE22-275認定試験の信頼できるソースが必要です。JPexamはとても良い選択で、E22-275の試験を最も短い時間に縮められますから、あなたの費用とエネルギーを節約することができます。それに、あなたに美しい未来を作ることに助けを差し上げられます。
インターネットで高品質かつ最新のEMCのE22-275の試験の資料を提供していると言うサイトがたくさんあります。が、サイトに相関する依頼できる保証が何一つありません。ここで私が言いたいのはJPexamのコアバリューです。すべてのEMCのE22-275試験は非常に重要ですが、こんな情報技術が急速に発展している時代に、JPexamはただその中の一つです。では、なぜ受験生たちはほとんどJPexamを選んだのですか。それはJPexamが提供した試験問題資料は絶対あなたが試験に合格することを保証しますから。なんでそうやって言ったのはJPexamが提供した試験問題資料は最新な資料ですから。それも受験生たちが実践を通して証明したことです。
JPexamのE22-275問題集は的中率が高いですから、あなたが一回で試験に合格するのを助けることができます。これは多くの受験生たちによって証明されたことです。ですから、問題集の品質を心配しないでください。これは間違いなくあなたが一番信頼できるE22-275試験に関連する資料です。まだそれを信じていないなら、すぐに自分で体験してください。そうすると、きっと私の言葉を信じるようになります。
JPexamに提供されている資料はIT認定試験に対して10年過ぎの経験を持っているプロフェッショナルによって研究と実践を通じて作成し出されたものです。JPexamは最新かつ最も正確な試験E22-275問題集を用意しておきます。JPexamは皆さんの成功のために存在しているものですから、JPexamを選択することは成功を選択するのと同じです。順調にIT認定試験に合格したいなら、JPexamはあなたの唯一の選択です。
試験番号：E22-275問題集
試験科目：recoverpoint backup and recovery specialist exam
最近更新時間：2014-01-23
問題と解答：全126問
100％の返金保証。1年間の無料アップデート。
JPexamはEMCのE22-275認定試験に便利なサービスを提供するサイトで、従来の試験によってJPexam が今年のEMCのE22-275認定試験を予測してもっとも真実に近い問題集を研究し続けます。
JPexamは専門的なIT認証サイトで、成功率が１００パーセントです。これは多くの受験生に証明されたことです。JPexamにはIT専門家が組み立てられた団体があります。彼らは受験生の皆さんの重要な利益が保障できるように専門的な知識と豊富な経験を活かして特別に適用性が強いトレーニング資料を研究します。その資料が即ちEMCのE22-275試験トレーニング資料で、問題集と解答に含まれていますから。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/E22-275_exam.html
NO.1 You are installing the RecoverPoint splitter agent on a B-Series switch. After downloading the agent
binary file to the blade processor, which step must be completed prior to successfully running the
command?
A. chmod +x agent_binary_file
B. chmod +rw agent_binary_file
C. /thirdparty/recoverpoint/install/zoning_script.sh
D. /thirdparty/recoverpoint/install/kdrv start
Answer: A
EMC参考書 E22-275参考書 E22-275 E22-275問題集 E22-275過去問 E22-275認定資格
NO.2 What is the blade processor in a Brocade splitter?
A. A separate command shell which loads and operates the splitter
B. A special slot in a Brocade director with intelligent switch capabilities
C. A daughterboard in the switch to allow RecoverPoint integration
D. A dedicated memory space in the RPA to integrate with a Brocade switch
Answer: A
EMC認定試験 E22-275 E22-275 E22-275認定証
NO.3 Which device allows the installation of a Brocade splitter into a DCX director?
A. PB-48k-18i
B. PB-48k-AP
C. PB-DCX-32P-E
D. PB-DCX-48P-8G
Answer: B
EMC E22-275練習問題 E22-275過去問 E22-275 E22-275
NO.4 You want to upgrade a RecoverPoint environment using Deployment Manager (DM). As a prerequisite
to continuing with the upgrade, which TCP port needs to be open between the management station where
the DM is installed and the RPA management IP addresses?
A. 22
B. 23
C. 80
D. 161
Answer: A
EMC過去問 E22-275 E22-275参考書 E22-275 E22-275参考書 E22-275
NO.5 You are finalizing a RecoverPoint setup that makes use of the Symmetrix VMAXe splitter. You are about
to create the masking view for the RecoverPoint cluster initiator group.
Which setting must be enabled to allow the RPAs to write to the replica volumes when image access is
disabled?
A. Write Protect Bypass
B. Always Push Old
C. Backlog Mirroring
D. Device Tagging
Answer: A
EMC E22-275 E22-275参考書
NO.6 Refer to the Exhibit.
You are troubleshooting a RecoverPoint issue where consistency groups, using a kdriver splitter, have
stopped working. While analyzing the problem, you ran detect Fibre Channel targets from the SAN
Diagnostics menu. What does this output tell you that relates to the problem in the environment?
A. RPA is not zoned to any hosts
B. All RPA HBA ports are being used as targets
C. Even and odd ports should not see the same targets
D. Ports 0 and 3 should not be connected to the same fabric
Answer: A
EMC E22-275 E22-275 E22-275参考書
NO.7 A customer wants to add a new RecoverPoint UserID. Which role must their UserID belong to in order to
manage user settings?
A. Security
B. Admin
C. Boxmgmt
D. Monitor
Answer: A
EMC認証試験 E22-275認証試験 E22-275過去問 E22-275過去問
NO.8 You have installed the Solaris kdriver on a host. When validating the installation, you find that the
splitter is not seen by the RecoverPoint Management Application. Other splitters appear correctly in the
GUI.
Which step should you take on the host to discover the splitter by the GUI?
A. Run the /etc/init.d/kdrv start command
B. Run the rc.kdrv configure command and restart the kdriver
C. Run the rc.kdrv start command and reboot the host
D. Run the devfsadm command
Answer: A
EMC認定試験 E22-275 E22-275認定証 E22-275 E22-275認定試験 E22-275
NO.9 In a cascaded RecoverPoint configuration, a customer experiences a site failure at the secondary site.
What impact does this have on replication?
A.Site 1 to Site 2 replication fails Site 2 to Site 3 replication fails
B.Site 1 to Site 2 replication fails Site 2 to Site 3 replication continues
C.Site 1 to Site 2 replication fails Site 1 to Site 3 replication continues
D.Site 2 to Site 3 replication fails Site 1 to Site 3 replication continues
Answer: A
EMC練習問題 E22-275認定試験 E22-275参考書 E22-275参考書 E22-275練習問題
NO.10 A customer has a RecoverPoint environment defined with two RPAs at each site. They created two
consistency groups (CGs), each one in a different RPA. Their business requires that both consistency
groups act as a single unit as they are dependent on one another.
How can they achieve this requirement?
A. Create one Group Set for both CGs
B. Enable the RecoverPoint Snapshot Consolidation feature
C. Select the same primary RPA for both CGs
D. Configure distributed consistency groups
Answer: A
EMC認定試験 E22-275過去問 E22-275 E22-275 E22-275練習問題
NO.11 Which generation of RecoverPoint Appliance hardware must be used to ensure you can use a CRR
over FC configuration?
A. Gen2 and 3 only
B. Gen2 and 4 only
C. Gen2, 3, and 4
D. Gen3 and 4 only
Answer: D
EMC認証試験 E22-275 E22-275 E22-275参考書
NO.12 In a Brocade splitter implementation using frame redirect mode, how many DPCs are available?
A. 1
B. 2
C. 3
D. 4
Answer: B
EMC参考書 E22-275 E22-275認証試験 E22-275認定試験 E22-275
NO.13 You have finished deploying SANTap in a RecoverPoint CRR environment. At Site 2 everything looks
fine. However, at Site 1 you see the following message on the RecoverPoint Management Application:
WARNING: RPA cannot access discovery AVT: 7001248288220000 ; Site1 ; RPA1 in Site1 ; Cisco -
CVT22-2109000dec3c3182
You have checked that back-end and front-end VSANs are properly configured with the correct members
in each. Which action can you take to perform a full discovery of ITLs and recreation of AVTs to fix this
issue?
A. SSH as 'admin' and run the refresh_santap_view command
B. Refresh the splitters on the RecoverPoint Management Application
C. Rescan the SAN on the RecoverPoint Management Application
D. SSH as 'admin' and run the get_santap_view command
Answer: A
EMC E22-275認定試験 E22-275認定証 E22-275認定資格
NO.14 A customer is planning to deploy a 2-node RecoverPoint cluster at each data center. They will make use
of dual stack for its LAN network connection.
How many IP addresses should the customer plan for per site, including management IP addresses.?
A. 5
B. 6
C. 7
D. 8
Answer: D
EMC過去問 E22-275 E22-275認定証 E22-275認証試験
NO.15 You have a customer with an EMC VNX array at each site that uses both block and file storage. They
would like to use the VNX splitter to replicate all their iSCSI data LUNs.
How would you configure RecoverPoint?
A. Use the Consistency Group Wizard to create a CG
B. Use Installation Manager and "Expose" all iSCSI LUNs
C. Check the "Enable iSCSI Replication" option in the CG profile
D. Replication of iSCSI LUNs are not supported at this time
Answer: A
EMC参考書 E22-275認定試験 E22-275認定資格 E22-275認定証 E22-275
NO.16 When installing a Microsoft Windows kdriver splitter, you receive the dialog box shown in the exhibit
and the installation stops.
What must you do to recover the installation?
A. Click Next, correct the SAN issue, and run SAN Diagnostics again
B. Click Next and Accept the SAN issue warning to continue the installation
C. Click Next to resume the installation with flags
D. Click Back to reconfigure the kdriver parameters
Answer: A
EMC過去問 E22-275参考書 E22-275認定試験 E22-275
NO.17 Refer to the Exhibit.
You are troubleshooting High Load activities on two consistency groups (CGs). As part of your tasks, you
have run the data collect and are reviewing the system log files for the CGs.
What is a possible root cause for this High Load period?
A. The preferred RPA has lost communications with the remote RPA and caused a failover of the CG
within the cluster.
B. The local site has lost connectivity to the remote site and caused the CG to go into Marking mode.
C. There is no journal assigned to the CG in the local site, causing latency build up during data transfer.
D. The copies are cross-connected between the sites causing additional I/O to flood the connectivity
between the sites.
Answer: A
EMC E22-275認定試験 E22-275 E22-275 E22-275過去問 E22-275認定試験
NO.18 You are selecting the RecoverPoint repository volume using Deployment Manager at a customer's site.
If the customer's environment makes use of an EMC VNX array, what needs to be considered?
A. Selected LUN will be formatted
B. Use of a thin provisioned LUN is supported
C. LUN is accessible by only one RPA
D. Thin LUNs have to be pre-allocated
Answer: A
EMC E22-275認証試験 E22-275認証試験 E22-275 E22-275
NO.19 You have just enabled the zones and re-enabled the configuration on a AP-7600B switch. Where would
you run the thirdparty/recoverpoint/install/kdrv status command to verify the status of the kdriver on the
switch?
A. As root in the blade processor
B. As admin in the blade processor
C. As root in the control processor
D. As admin in the control processor
Answer: A
EMC E22-275 E22-275過去問 E22-275
NO.20 You are implementing a RecoverPoint CRR solution. The RPAs that were delivered do not have the
correct version of RecoverPoint.
What is the EMC-preferred way to load the correct software version to the RPAs?
A. Before launching Deployment Manager
B. During the Deployment Manager installation process
C. After completing the installation but before the license is installed
D. After the installation is complete
Answer: A
EMC認定証 E22-275認証試験 E22-275 E22-275 E22-275
JPexamは最新の000-276問題集と高品質の70-246問題と回答を提供します。JPexamの70-466 VCEテストエンジンとMB2-866試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のHP0-S33 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论