IT業界の中でたくさんの野心的な専門家がいって、IT業界の中でより一層頂上まで一歩更に近く立ちたくてHPのHP0-Y18試験に参加して認可を得たくて、HP のHP0-Y18試験が難度の高いので合格率も比較的低いです。JPexamの商品は試験問題を広くカーバして、認証試験の受験生が便利を提供し、しかも正確率100%です。そして、試験を安心に参加してください。
HPのHP0-Y18認定試験を一回合格するためには必ず良い準備しなければなりません。完全な知識がこの高度専門の試験に合格するのは必要でJPexamは君にこれらの資源を完全な需要に備わっています。
短い時間に最も小さな努力で一番効果的にHPのHP0-Y18試験の準備をしたいのなら、JPexamのHPのHP0-Y18試験トレーニング資料を利用することができます。JPexamのトレーニング資料は実践の検証に合格すたもので、多くの受験生に証明された１００パーセントの成功率を持っている資料です。JPexamを利用したら、あなたは自分の目標を達成することができ、最良の結果を得ます。
難しいIT認証試験に受かることを選んだら、頑張って準備すべきです。JPexamのHPのHP0-Y18試験トレーニング資料はIT認証試験に受かる最高の資料で、手に入れたら成功への鍵を持つようになります。JPexamのHPのHP0-Y18試験トレーニング資料は信頼できるもので、１００パーセントの合格率を保証します。
試験番号：HP0-Y18問題集
試験科目：ProCurve Secure Mobility Solutions
最近更新時間：2014-04-18
問題と解答：全104問
100％の返金保証。1年間の無料アップデート。
JPexamは客様の要求を満たせていい評判をうけいたします。たくさんのひとは弊社の商品を使って、試験に順調に合格しました。そして、かれたちがリピーターになりました。JPexamが提供したHPのHP0-Y18試験問題と解答が真実の試験の練習問題と解答は最高の相似性があり、一年の無料オンラインの更新のサービスがあり、100%のパス率を保証して、もし試験に合格しないと、弊社は全額で返金いたします。
現状に自己満足して、自分の小さな持ち場を守って少ない給料をもらって解雇されるのを待っている人がいないです。こんな生活はとてもつまらないですから。あなたの人生をよりカラフルにしたいのですか。ここで成功へのショートカットを教えてあげます。即ちHPのHP0-Y18認定試験に受かることです。この認証を持っていたら、あなたは、高レベルのホワイトカラーの生活を送ることができます。実力を持っている人になって、他の人に尊敬されることもできます。JPexamはHPのHP0-Y18試験トレーニング資料を提供できます。JPexamを利用したら、あなたは美しい夢を実現することができます。さあ、ためらわずにJPexamのHPのHP0-Y18試験トレーニング資料をショッピングカートに入れましょう。
もちろん、試験に関連する資料を探しているとき、他の様々な資料を見つけることができます。しかし、調査や自分自身の試用の後、JPexamのHP0-Y18問題集が試験の準備ツールに最適であることはわかります。JPexamの資料は試験に準備する時間が十分ではない受験生のために特別に開発されるものです。それはあなたを試験に準備するときにより多くの時間を節約させます。しかも、JPexamのHP0-Y18問題集はあなたが一回で試験に合格することを保証します。また、問題集は随時更新されていますから、試験の内容やシラバスが変更されたら、JPexamは最新ニュースを与えることができます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/HP0-Y18_exam.html
NO.1 What is the default management username and password on the ProCurve AP 530?
A. The username is admin, and the password is admin.
B. The username is admin, and the password is procurve.
C. The username is manager, and the password is procurve.
D. The username is admin, and there is no default password.
Answer: A
HP練習問題 HP0-Y18練習問題 HP0-Y18認定証 HP0-Y18過去問 HP0-Y18 HP0-Y18
NO.2 Your company wants to use the 2. 4GHz frequency on both of your ProCurve AP 530 radios.What
must you do so that both radios can use this frequency?
A. Set both radios to either 802. 11g or 802. 11b.
B. Set both radios to either 802. 11g or 802. 11b, and install an external antenna for radio 2.
C. Install an 802. 11b/g card on radio 2, and set both radios to either 802. 11g or 802. 11b.
D. Set one radio to 802. 11g and one radio to 802. 11b, install an external antenna for radio 1, and
configure radio 1 to use an external antenna.
Answer: B 18. Which ProCurve AP 530 feature is most beneficial for a small to medium business that has
strong security needs?
A. It monitors for excessive probes to detect possible intrusion attempts.
B. Its internal RADIUS server provides standalone support for 802. 1X authentication.
C. Unlike the ProCurve AP 420, it can operate all 16 of its wireless LANs in closed system.
D. It supports 802. 11a, and hackers generally do not check for networks on this frequency.
Answer: B
HP HP0-Y18参考書 HP0-Y18
19. A network administrator accesses the Marketing WLAN, which is assigned to VLAN 32 on the
ProCurve AP 530.When the AP 530 submits the administrator's login credentials to the RADIUS server,
the RADIUS server returns a dynamic VLAN assignment of 10 to the AP 530.The AP 530 is using the
default settings for dynamic and static VLAN support. In which VLAN does the AP 530 place the network
administrator's traffic?
A. 32, because dynamic VLANs are disabled by default
B. the default management VLAN, because there is a VLAN conflict
C. 10, because dynamic VLAN assignments override static VLAN assignments
D. 32, because static VLAN assignments override dynamic VLAN assignments
Answer: C
HP HP0-Y18過去問 HP0-Y18問題集 HP0-Y18認定証
20. You are configuring a WLAN on the ProCurve AP 420.When students, faculty members, and
administrators associate to the WLAN, you want them to receive the dynamic VLAN assignment for their
particular group.However, when staff members associate to the WLAN you want their traffic to be placed
in the VLAN that is assigned to the WLAN. How do you configure the AP 420 to support these VLAN
assignments?
A. You select the Dynamic VLAN option for the WLAN.Static VLANs are supported by default.
B. You select both the Static and Dynamic VLAN options.These global options apply to the entire AP 420.
C. You select the Enable VLAN option for the WLAN.This option enables support for both static and
dynamic VLANs on this WLAN only.
D. You select the Dynamic VLAN option, which enables both static and dynamic VLANs.This global
option applies to the entire AP 420.
Answer: D
HP HP0-Y18 HP0-Y18認定試験 HP0-Y18認定資格
NO.3 Wireless networks present certain challenges.Which wireless network challenge does ProCurve
Mobility Infrastructure Solutions help you address?
A. Users are less productive when using a wireless connection.
B. 802. 11 standards do not provide any guidelines for Layer 2 roaming.
C. 802. 11 standards do not provide any encryption, so you must create VPN tunnels to each end station.
D. Multiple users connect to the network through the same AP, but access must be authorized for each
user.
Answer: D
HP認定証 HP0-Y18認定資格 HP0-Y18認定資格 HP0-Y18 HP0-Y18練習問題
NO.4 When can a station no longer communicate with an AP?
A. when the received signal falls below 0 dBm
B. when the received signal falls below the background noise
C. when the received signal falls below the station's receiver sensitivity
D. when the received signal falls below the fade margin for the wireless cell
Answer: C
HP認定試験 HP0-Y18練習問題 HP0-Y18参考書 HP0-Y18参考書 HP0-Y18
NO.5 The ProCurve Mobility Manager (PMM) site-planning tool provides an Auto Placement tool.What does
this tool take into account as it places devices on the floor plan?
A. the existing RF interference
B. the obstacles that you have defined
C. other devices already placed on the floor plan
D. the floor plan dimensions and desired capacity
Answer: D
HP HP0-Y18 HP0-Y18 HP0-Y18
NO.6 Which Quality of Service (QoS) mechanism do both the ProCurve AP 420 and the ProCurve AP 530
support?
A. Wi-Fi Multimedia (WMM)
B. SpectraLink Voice Priority (SVP)
C. Differentiated Services (DiffServ)
D. Wi-Fi Multimedia Extensions (WME)
Answer: B
HP認定試験 HP0-Y18 HP0-Y18過去問 HP0-Y18認定資格 HP0-Y18認証試験
NO.7 Your company has a branch office down the street from your main office.You want to connect the
networks between the two offices, and physical cabling is not an option.Which wireless devices should
you select for this environment?
A. two ProCurve AP 420s
B. two ProCurve AP 530s
C. two RP 230s and a Wireless Edge Services xl Module
D. two RP 220s with Yagi antennas and a Wireless Edge Services zl Module
Answer: B
HP HP0-Y18 HP0-Y18参考書 HP0-Y18
NO.8 The ProCurve AP 420 radio has one Basic Service Set Identifier (BSSID), and each of the two AP 530
radios has 16 BSSIDs.What is the implication of this difference?
A. The AP 420 can advertise only 1 WLAN, but the AP 530 can advertise 16.
B. The AP 420 can support only 1 WLAN, but the AP 530 can support 32.
C. The AP 420 can support only 1 WLAN, but the AP 530 can support 16.
D. The AP 420 can advertise only 1 WLAN, but the AP 530 can advertise 32.
Answer: A
HP HP0-Y18 HP0-Y18 HP0-Y18 HP0-Y18
NO.9 What purpose does the second software image on the ProCurve AP 420 serve?
A. It allows you to choose two different images to load onto the AP.
B. It allows you to keep the last software image that was loaded onto the AP.
C. It provides a failsafe image in the event the primary image becomes corrupted.
D. It provides an alternate software version in the event the primary does not support your configuration.
Answer: C
HP HP0-Y18過去問 HP0-Y18 HP0-Y18過去問
NO.10 What does Spanning Tree Protocol (STP) on the ProCurve AP 530 prevent?
A. loops over connections to stations in the wireless network
B. loops over the APs Ethernet and wireless bridge connections
C. loops over connections between stations in the wireless and the wired network
D. loops over connections between only wireless stations associated with multiple APs
Answer: B
HP認証試験 HP0-Y18 HP0-Y18
NO.11 What is a function of ProCurve Identity Driven Manager (IDM)?
A. It identifies which wireless users must associate to the wireless network.
B. It enables you to load different configuration files onto your ProCurve Mobility Infrastructure devices.
C. It guides you in creating policies that can be applied, through RADIUS, to either wired or wireless
users.
D. It adds special features to ProCurve Manager (PCM) for configuring radio and wireless security
settings.
Answer: C
HP参考書 HP0-Y18練習問題 HP0-Y18 HP0-Y18問題集 HP0-Y18問題集
NO.12 You need to provide a wireless network for a small area that will require two access points.For this
wireless network, you want to support both 802. 11b/g and 802. 11a radios throughout the entire
coverage area.What would you choose?
A. two ProCurve AP 420s
B. two ProCurve AP 530s
C. ProCurve Wireless LAN System with two Radio Port (RP) 210s
D. ProCurve Wireless LAN System with one RP 230 and one RP 210
Answer: B
HP認証試験 HP0-Y18 HP0-Y18
NO.13 How many configuration files can be stored on the ProCurve AP 420?
A. 2: the startup-config and the factory default config
B. 3: the startup-config, the factory default config, and one custom config
C. 3: the factory default config, the startup-config, and the backup startup-config
D. 4: the factory default config, the startup-config, the backup startup-config, and one custom config
Answer: A
HP HP0-Y18 HP0-Y18認定証 HP0-Y18問題集 HP0-Y18 HP0-Y18
NO.14 What does the slot time determine?
A. the number of seconds the AP waits between sending beacons
B. the length of time the station waits between detecting a transmission and sending a frame
C. the beginning of the 802. 11 frame, which enables the AP and the station to synchronize their
transmissions
D. how long the station can "sleep" before it must become active and check the AP to see if there are any
transmissions waiting for it
Answer: B
HP HP0-Y18練習問題 HP0-Y18参考書 HP0-Y18
NO.15 You are configuring a ProCurve AP 530.You configure two WLANs.What is one reason to enable the
first WLAN only on radio 1 and the second WLAN only on radio 2?
A. to overcome environmental obstacles
B. to double the capacity of each WLAN by using two radios
C. to separate different types of wireless traffic into different collision domains
D. to allow users to choose their radio but still connect to the same Basic Service Set (BSS)
Answer: C
HP過去問 HP0-Y18認定試験 HP0-Y18
NO.16 You want ProCurve Radio Port (RP) 1's radio to function as a neighbor for RP 2's radio.RP 1 will
monitor RP 2 and take action if RP 2 becomes unavailable.You configure RP 1's radio to take which
action if RP 2 becomes unavailable? (Select two. )
A. Open its data rates.
B. Change the radio's channel.
C. Increase the radio's transmit power.
D. Order stations associated with RP 2 to roam.
E. Change the radio mode from 802. 11a to 802. 11b/g.
Answer: AC
HP参考書 HP0-Y18問題集 HP0-Y18 HP0-Y18 HP0-Y18
NO.17 Which security option was part of the original 802. 11 standard?
A. 802. 1X
B. Shared-key WEP
C. Dynamic Wired Equivalent Privacy (WEP)
D. Wi-Fi Protected Access with preshared keys (WPA-PSK)
Answer: B
HP HP0-Y18問題集 HP0-Y18 HP0-Y18
JPexamは最新の74-343問題集と高品質のIIA-CCSA問題と回答を提供します。JPexamのEX0-118 VCEテストエンジンと000-120試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のCUR-011 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论