難しいMicrosoft 70-681認定試験に対応する対策

現在、市場でオンラインのMicrosoftの70-681試験トレーニング資料はたくさんありますが、JPexamのMicrosoftの70-681試験トレーニング資料は絶対に最も良い資料です。我々JPexamはいつでも一番正確なMicrosoftの70-681資料を提供するように定期的に更新しています。それに、JPexamのMicrosoftの70-681試験トレーニング資料が一年間の無料更新サービスを提供しますから、あなたはいつも最新の資料を持つことができます。

Microsoftの70-681認定試験は現在で本当に人気がある試験ですね。まだこの試験の認定資格を取っていないあなたも試験を受ける予定があるのでしょうか。確かに、これは困難な試験です。しかし、難しいといっても、高い点数を取って楽に試験に合格できないというわけではないです。では、まだ試験に合格するショートカットがわからないあなたは、受験のテクニックを知りたいですか。今教えてあげますよ。JPexamの70-681問題集を利用することです。

恐いMicrosoftの70-681試験をどうやって合格することを心配していますか。心配することはないよ、JPexamのMicrosoftの70-681試験トレーニング資料がありますから。この資料を手に入れたら、全てのIT認証試験がたやすくなります。JPexamのMicrosoftの70-681試験トレーニング資料はMicrosoftの70-681認定試験のリーダーです。

JPexam Microsoftの70-681試験資料は特別にデザインされたもので、IT領域のエリートが組み立てられた強い団体が受験生の皆様に向いて研究した資料です。認証試験に合格したら、あなたはIT領域で国際的な価値を表すことができます。JPexamには多くのダンプおよびトレーニング資料のサプライヤーがありますから、あなたが試験に受かることを保証します。JPexamは事実を通じて話しますから、奇跡が現れるときに我々が言ったすべての言葉を証明できます。

このインターネットが普及された時代に、どのような情報を得るのが非常に簡単なことだということを我々はよく知っていますが、品質と適用性の欠如が問題です。インターネットでMicrosoftの70-681試験トレーニング資料を探す人がたくさんいますが、どれが信頼できるか良く分からないです。ここで私はJPexamのMicrosoftの70-681試験トレーニング資料を勧めたいです。この資料はインターネットでのクリック率と好評率が一番高いです。JPexamはMicrosoftの70-681試験トレーニング資料の一部の問題と解答を無料に提供しますから、あなたは試用してから買うかどうかを決めることができます。

21世紀の情報化時代の急流の到来につれて、人々はこの時代に適応できるようにいつも自分の知識を増加していてますが、まだずっと足りないです。IT業種について言えば、Microsoftの70-681認定試験はIT業種で欠くことができない認証ですから、この試験に合格するのはとても必要です。この試験が難しいですから、試験に合格すれば国際的に認証され、受け入れられることができます。そうすると、美しい未来と高給をもらう仕事を持てるようになります。JPexamというサイトは世界で最も信頼できるIT認証トレーニング資料を持っていますから、JPexamを利用したらあなたがずっと期待している夢を実現することができるようになります。１００パーセントの合格率を保証しますから、Microsoftの70-681認定試験を受ける受験生のあなたはまだ何を待っているのですか。速くJPexamというサイトをクリックしてください。

試験番号：70-681問題集
試験科目：TS: Windows 7 and Office 2010, Deploying
最近更新時間：2014-03-30
問題と解答：全85問
100％の返金保証。1年間の無料アップデート。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/70-681_exam.html

NO.1 You have a single-domain Active Directory Domain Services (AD DS) forest with two domain controllers
that run Windows Server 2008 R2. Your network consists of two subnets. All client computers are located
in one subnet. Both the DHCP server and the Windows Deployment Services (WDS) server are located in
the other subnet.
You need to ensure that client computers can be deployed over the network by using WDS.
What should you do?
A. Forward all client DHCP broadcast packets to only the DHCP server.
B. Forward all client DHCP broadcast packets to only the WDS server.
C. Forward all client DHCP broadcast packets to both the DHCP server and the WDS server.
D. Add a DNS service location (SRV) record for port 60 that is pointed toward the WDS server.
Answer: C

Microsoft認定証   70-681   70-681問題集   70-681   70-681認証試験

NO.2 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You install Microsoft Deployment Toolkit (MDT) 2010 on a server named Server1. You install Microsoft
SQL Server 2008 on a server named Server2. You create an MDT deployment database for
location-specific network installations of Windows 7. Server1 and Server2 run Internet Information
Services (IIS).
You need to ensure that the MDT deployment database supports Windows integrated security from the
Windows Preinstallation Environment (Windows PE).
What should you do?
A. Create a shared folder on Server1.
B. Create a shared folder on Server2.
C. Enable Integrated Windows authentication in IIS on Server1.
D. Enable Integrated Windows authentication in IIS on Server2.
Answer: B

Microsoft練習問題   70-681認証試験   70-681   70-681

NO.3 Your company uses Key Management Service (KMS) for Microsoft Volume Activation. You have a
Windows 7 image, which will be deployed to the company s client computers.
You deploy the image to a client computer as a test. When you log on to the client computer, a warning
states that the grace period for activation has expired.
You need to prevent the grace period from expiring before the image is deployed to the client computers.
Which command should you run?
A. Sysprep /audit
B. Sysprep /generalize
C. slmgr.vbs /ckms
D. slmgr.vbs /cpky
Answer: B

Microsoft練習問題   70-681   70-681認定資格   70-681認定証

NO.4 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You plan to use a server to deploy Windows 7 by using Lite Touch Installation (LTI).
You need to ensure that this server has the required software for deploying Windows 7 by using LTI. You
install Microsoft Deployment Toolkit (MDT) 2010.
What should you install next?
A. Microsoft Application Compatibility Toolkit
B. System Center Configuration Manager
C. Windows Automated Installation Kit
D. Windows Deployment Services
Answer: C

Microsoft   70-681   70-681

NO.5 You have an Active Directory Domain Services (AD DS) environment. All client computers run Windows
XP.
You will use Microsoft Deployment Toolkit (MDT) 2010 to deploy Windows 7 to all client computers. The
deployment project has the following requirements:
User interaction must not be required for any deployment.
You must be able to initiate deployments by using Windows Deployment Services (WDS).
You need to meet the deployment project requirements when you deploy Windows 7 by using MDT 2010.
Which application should you install?
A. Automated Deployment Services
B. Remote Installation Services
C. System Center Configuration Manager
D. System Center Operations Manager
Answer: C

Microsoft   70-681練習問題   70-681認定試験

NO.6 All client computers in your company run Volume License editions of Windows 7 and Office 2010. All
computers in the company are activated by using Key Management Service (KMS) hosts.
The company is opening a new branch office. The new branch office will not have access to the corporate
network or to the Internet for at least eight months. Windows 7 and Office 2010 have been deployed on
the client computers for the new branch office, but are not yet activated and have not been shipped.
You need to ensure that users in the new branch office will be able to use Windows 7 and Office 2010
without receiving prompts for activation.
What should you do to the new branch office client computers?
A. Enter Full Packaged Product (FPP) license keys for Windows 7 and Office 2010.
B. Enter Original Equipment Manufacturer (OEM) license keys for Windows 7 and Office 2010.
C. Activate Windows 7 and Office 2010 by using Multiple Activation Key (MAK) licenses.
D. Activate Windows 7 and Office 2010 by using the KMS hosts.
Answer: C

Microsoft認定資格   70-681   70-681   70-681   70-681認定資格   70-681

NO.7 You are using Windows Deployment Services (WDS) to deploy Windows 7 to your company s client
computers. All servers in your network run Windows Server 2008 R2. The WDS server and the DHCP
server are running on the same computer.
You need to ensure that the client computers are able to connect to the WDS server by using PXE.
What should you do first?
A. Add option 60 to the DHCP scope.
B. Add option 64 to the DHCP scope.
C. Block WDS from listening on port 60.
D. Block WDS from listening on port 64.
Answer: A

Microsoft   70-681   70-681   70-681

NO.8 All servers in your company run Windows Server 2008. All client computers run Windows Vista and
Office 2007. Key Management Service (KMS) hosts run Windows Server 2008. All computers are
activated by using KMS.
You will deploy Windows Server 2008 R2 to all new servers, and you will deploy Windows 7 and Office
2010 to all client computers.
You need to ensure that all KMS hosts can activate all versions of Windows and Office that are used in the
company.
What should you do?
A. Install the Microsoft Office 2010 KMS Host License Pack on the KMS hosts.
B. Install Volume Activation Management Tool (VAMT) 2.0 on the KMS hosts.
C. Migrate the KMS hosts to computers that run Windows 7.
D. Migrate the KMS hosts to computers that run Windows Server 2008 R2.
Answer: D

Microsoft   70-681認定資格   70-681認定証   70-681

NO.9 Your company uses Key Management Service (KMS) for Microsoft Volume Activation. You create a
new Windows 7 image. You deploy the image to client computers.
You need to activate the KMS client on the client computers before the client computers are shipped to
users.
Which command should you run?
A. sysprep /oobe
B. sysprep /generalize
C. slmgr.vbs /ato
D. slmgr.vbs /rearm
Answer: C

Microsoft過去問   70-681認定資格   70-681問題集   70-681認定資格   70-681

NO.10 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You add the Windows Deployment Services (WDS) role and the DHCP Server role to a server.
You need to ensure that client computers that boot from the network locate the WDS server automatically.
Which two actions should you perform on the WDS server? (Each correct answer presents part of the
solution. Choose two.)
A. Select the Do not listen on port 67 check box.
B. Select the Configure DHCP option 60 to indicate that this server is also a PXE server check box.
C. Click the Respond to all client computers (known and unknown) option in WDS.
D. Click the Obtain IP address from DHCP option in WDS.
Answer: AB

Microsoft   70-681   70-681問題集   70-681過去問

NO.11 Your company uses System Center Configuration Manager 2007 R2 for operating system deployment.
You have a boot image that was previously used to deploy Windows 7 to client computers.
You load the boot image on new client computers that contain new network adapters. The drivers for the
network adapters are not installed after the boot image is loaded.
You need to ensure that the drivers for the network adapters are properly installed during the loading of
the boot image.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install the device drivers on a target computer.
B. Install the device drivers on a reference computer.
C. Import the device drivers into the driver catalog.
D. Add the device drivers to the boot image.
Answer: CD

Microsoft認定証   70-681練習問題   70-681   70-681

NO.12 Your network has one subnet for servers and one subnet for client computers. The subnets are
separated by a router. In the server subnet, Server1 is a Windows Server 2008 R2 server that runs DHCP
and DNS.
Your deployment infrastructure is configured to allow computers in the client computer subnet to boot by
using PXE. However, client computers that attempt to use PXE to boot are not able to connect to the
deployment infrastructure.
You need to ensure that client computers are able to connect to the deployment infrastructure by using
PXE.
What should you do?
A. Configure DHCP reservations.
B. Configure an IP Helper Address on the router.
C. Place a DNS server in the client computer subnet.
D. Run the netsh dhcp add server Server1 command.
Answer: B

Microsoft認定資格   70-681問題集   70-681過去問   70-681

NO.13 You use Business Desktop Deployment (BDD) 2007 with Update 2 to prepare and deploy Windows
Vista and Office 2007 to client computers.
You install Microsoft Deployment Toolkit (MDT) 2010. The BDD deployment shares are not listed in the
Deployment Workbench.
You need to ensure that the BDD deployment shares can be used with MDT 2010.
What should you do?
A. Create new deployment shares.
B. Open the deployment shares.
C. Copy the deployment shares.
D. Close all deployment shares.
Answer: B

Microsoft   70-681   70-681

NO.14 You have a single-domain Active Directory Domain Services (AD DS) forest. The network includes a
Windows Deployment Services (WDS) server and a separate DHCP server. You set up a multicast
transmission of Windows 7 and deploy Windows 7 on 100 new client computers via multicast. The
multicast transmission average speed is 512 KBps.
You deploy Windows 7 on an additional 50 new client computers and 2 older client computers via
multicast. The multicast transmission average speed is 56 KBps. You remove the older client computers
and restart the multicast transmission. The multicast transmission average speed is again 512 KBps.
You need to ensure that Windows 7 is deployed on all client computers via multicast and that older client
computers do not decrease the multicast average transmission speed for new client computers.
What should you do?
A. Configure multicast to separate clients into slow, medium, and fast sessions.
B. Configure multicast to automatically disconnect clients below 128 KBps.
C. Configure Multicast Address Dynamic Client Allocation Protocol (MADCAP).
D. Configure the PXE response delay to 0 seconds.
Answer: A

Microsoft認定資格   70-681問題集   70-681

NO.15 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008. All client computers run Windows 7. You use Microsoft Deployment Toolkit (MDT) 2010 for
your deployment infrastructure.
You need to configure your deployment infrastructure to use single-instance storage.
Which command should you run?
A. imagex /export
B. oscdimg d
C. sysprep /oobe
D. wpeutil /disableextendedcharactersforvolume
Answer: A

Microsoft練習問題   70-681過去問   70-681   70-681練習問題   70-681認定証

JPexamは最新のC_THR12_66問題集と高品質の00M-620問題と回答を提供します。JPexamのMSC-235 VCEテストエンジンと70-486試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-N45 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク：http://www.jpexam.com/70-681_exam.html

Microsoftの70-681認定試験の復習問題集

Microsoftの70-681試験にもっと首尾よく合格したいのですか。そうしたら速くJPexamを選びましょう。JPexamは様々なIT認証試験を受ける人々に正確な試験資料を提供するサイトです。JPexamはIT職員としてのあなたに昇進するチャンスを与えられます。JPexam が提供したMicrosoftの70-681試験に関する一部の無料の問題と解答を利用してみることができます。そうすると、我々の信頼性をテストできます。

JPexamはIT試験問題集を提供するウエブダイトで、ここによく分かります。最もよくて最新で資料を提供いたします。こうして、君は安心で試験の準備を行ってください。弊社の資料を使って、１００％に合格を保証いたします。もし合格しないと、われは全額で返金いたします。JPexamはずっと君のために最も正確なMicrosoftの70-681試験に関する資料を提供して、君が安心に選択することができます。君はオンラインで無料な練習問題をダウンロードできて、１００％で試験に合格しましょう。

試験番号：70-681問題集
試験科目：TS: Windows 7 and Office 2010, Deploying
最近更新時間：2014-01-17
問題と解答：全85問
100％の返金保証。1年間の無料アップデート。

もちろん、試験に関連する資料を探しているとき、他の様々な資料を見つけることができます。しかし、調査や自分自身の試用の後、JPexamの70-681問題集が試験の準備ツールに最適であることはわかります。JPexamの資料は試験に準備する時間が十分ではない受験生のために特別に開発されるものです。それはあなたを試験に準備するときにより多くの時間を節約させます。しかも、JPexamの70-681問題集はあなたが一回で試験に合格することを保証します。また、問題集は随時更新されていますから、試験の内容やシラバスが変更されたら、JPexamは最新ニュースを与えることができます。

JPexamはMicrosoftの70-681認定試験に便利なサービスを提供するサイトで、従来の試験によってJPexam が今年のMicrosoftの70-681認定試験を予測してもっとも真実に近い問題集を研究し続けます。

70-681試験はMicrosoftの認定試験の一つですが、もっとも重要なひとつです。Microsoftの70-681の認定試験に合格するのは簡単ではなくて、JPexamは70-681試験の受験生がストレスを軽減し、エネルギーと時間を節約するために専門研究手段として多様な訓練を開発して、JPexamから君に合ったツールを選択してください。

人生のチャンスを掴むことができる人は殆ど成功している人です。ですから、ぜひJPexamというチャンスを掴んでください。JPexamのMicrosoftの70-681試験トレーニング資料はあなたがMicrosoftの70-681認定試験に合格することを助けます。この認証を持っていたら、あなたは自分の夢を実現できます。そうすると人生には意義があります。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/70-681_exam.html

NO.1 All client computers in your company run Volume License editions of Windows 7 and Office 2010. All
computers in the company are activated by using Key Management Service (KMS) hosts.
The company is opening a new branch office. The new branch office will not have access to the corporate
network or to the Internet for at least eight months. Windows 7 and Office 2010 have been deployed on
the client computers for the new branch office, but are not yet activated and have not been shipped.
You need to ensure that users in the new branch office will be able to use Windows 7 and Office 2010
without receiving prompts for activation.
What should you do to the new branch office client computers?
A. Enter Full Packaged Product (FPP) license keys for Windows 7 and Office 2010.
B. Enter Original Equipment Manufacturer (OEM) license keys for Windows 7 and Office 2010.
C. Activate Windows 7 and Office 2010 by using Multiple Activation Key (MAK) licenses.
D. Activate Windows 7 and Office 2010 by using the KMS hosts.
Answer: C

Microsoft問題集   70-681   70-681

NO.2 You have an Active Directory Domain Services (AD DS) environment. All client computers run Windows
XP.
You will use Microsoft Deployment Toolkit (MDT) 2010 to deploy Windows 7 to all client computers. The
deployment project has the following requirements:
User interaction must not be required for any deployment.
You must be able to initiate deployments by using Windows Deployment Services (WDS).
You need to meet the deployment project requirements when you deploy Windows 7 by using MDT 2010.
Which application should you install?
A. Automated Deployment Services
B. Remote Installation Services
C. System Center Configuration Manager
D. System Center Operations Manager
Answer: C

Microsoft認定試験   70-681   70-681認証試験

NO.3 Your company uses System Center Configuration Manager 2007 R2 for operating system deployment.
You have a boot image that was previously used to deploy Windows 7 to client computers.
You load the boot image on new client computers that contain new network adapters. The drivers for the
network adapters are not installed after the boot image is loaded.
You need to ensure that the drivers for the network adapters are properly installed during the loading of
the boot image.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install the device drivers on a target computer.
B. Install the device drivers on a reference computer.
C. Import the device drivers into the driver catalog.
D. Add the device drivers to the boot image.
Answer: CD

Microsoft認定資格   70-681   70-681   70-681参考書   70-681   70-681認定試験

NO.4 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You add the Windows Deployment Services (WDS) role and the DHCP Server role to a server.
You need to ensure that client computers that boot from the network locate the WDS server automatically.
Which two actions should you perform on the WDS server? (Each correct answer presents part of the
solution. Choose two.)
A. Select the Do not listen on port 67 check box.
B. Select the Configure DHCP option 60 to indicate that this server is also a PXE server check box.
C. Click the Respond to all client computers (known and unknown) option in WDS.
D. Click the Obtain IP address from DHCP option in WDS.
Answer: AB

Microsoft   70-681   70-681認定試験   70-681問題集   70-681   70-681過去問

NO.5 You have a single-domain Active Directory Domain Services (AD DS) forest. The network includes a
Windows Deployment Services (WDS) server and a separate DHCP server. You set up a multicast
transmission of Windows 7 and deploy Windows 7 on 100 new client computers via multicast. The
multicast transmission average speed is 512 KBps.
You deploy Windows 7 on an additional 50 new client computers and 2 older client computers via
multicast. The multicast transmission average speed is 56 KBps. You remove the older client computers
and restart the multicast transmission. The multicast transmission average speed is again 512 KBps.
You need to ensure that Windows 7 is deployed on all client computers via multicast and that older client
computers do not decrease the multicast average transmission speed for new client computers.
What should you do?
A. Configure multicast to separate clients into slow, medium, and fast sessions.
B. Configure multicast to automatically disconnect clients below 128 KBps.
C. Configure Multicast Address Dynamic Client Allocation Protocol (MADCAP).
D. Configure the PXE response delay to 0 seconds.
Answer: A

Microsoft参考書   70-681   70-681練習問題   70-681

NO.6 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008. All client computers run Windows 7. You use Microsoft Deployment Toolkit (MDT) 2010 for
your deployment infrastructure.
You need to configure your deployment infrastructure to use single-instance storage.
Which command should you run?
A. imagex /export
B. oscdimg d
C. sysprep /oobe
D. wpeutil /disableextendedcharactersforvolume
Answer: A

Microsoft過去問   70-681認定試験   70-681過去問   70-681参考書

NO.7 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You plan to use a server to deploy Windows 7 by using Lite Touch Installation (LTI).
You need to ensure that this server has the required software for deploying Windows 7 by using LTI. You
install Microsoft Deployment Toolkit (MDT) 2010.
What should you install next?
A. Microsoft Application Compatibility Toolkit
B. System Center Configuration Manager
C. Windows Automated Installation Kit
D. Windows Deployment Services
Answer: C

Microsoft   70-681認証試験   70-681   70-681   70-681

NO.8 Your network has one subnet for servers and one subnet for client computers. The subnets are
separated by a router. In the server subnet, Server1 is a Windows Server 2008 R2 server that runs DHCP
and DNS.
Your deployment infrastructure is configured to allow computers in the client computer subnet to boot by
using PXE. However, client computers that attempt to use PXE to boot are not able to connect to the
deployment infrastructure.
You need to ensure that client computers are able to connect to the deployment infrastructure by using
PXE.
What should you do?
A. Configure DHCP reservations.
B. Configure an IP Helper Address on the router.
C. Place a DNS server in the client computer subnet.
D. Run the netsh dhcp add server Server1 command.
Answer: B

Microsoft   70-681   70-681   70-681

NO.9 You have a single-domain Active Directory Domain Services (AD DS) forest with two domain controllers
that run Windows Server 2008 R2. Your network consists of two subnets. All client computers are located
in one subnet. Both the DHCP server and the Windows Deployment Services (WDS) server are located in
the other subnet.
You need to ensure that client computers can be deployed over the network by using WDS.
What should you do?
A. Forward all client DHCP broadcast packets to only the DHCP server.
B. Forward all client DHCP broadcast packets to only the WDS server.
C. Forward all client DHCP broadcast packets to both the DHCP server and the WDS server.
D. Add a DNS service location (SRV) record for port 60 that is pointed toward the WDS server.
Answer: C

Microsoft   70-681練習問題   70-681認証試験

NO.10 All servers in your company run Windows Server 2008. All client computers run Windows Vista and
Office 2007. Key Management Service (KMS) hosts run Windows Server 2008. All computers are
activated by using KMS.
You will deploy Windows Server 2008 R2 to all new servers, and you will deploy Windows 7 and Office
2010 to all client computers.
You need to ensure that all KMS hosts can activate all versions of Windows and Office that are used in the
company.
What should you do?
A. Install the Microsoft Office 2010 KMS Host License Pack on the KMS hosts.
B. Install Volume Activation Management Tool (VAMT) 2.0 on the KMS hosts.
C. Migrate the KMS hosts to computers that run Windows 7.
D. Migrate the KMS hosts to computers that run Windows Server 2008 R2.
Answer: D

Microsoft   70-681参考書   70-681問題集

NO.11 You are using Windows Deployment Services (WDS) to deploy Windows 7 to your company s client
computers. All servers in your network run Windows Server 2008 R2. The WDS server and the DHCP
server are running on the same computer.
You need to ensure that the client computers are able to connect to the WDS server by using PXE.
What should you do first?
A. Add option 60 to the DHCP scope.
B. Add option 64 to the DHCP scope.
C. Block WDS from listening on port 60.
D. Block WDS from listening on port 64.
Answer: A

Microsoft過去問   70-681練習問題   70-681参考書   70-681

NO.12 Your company uses Key Management Service (KMS) for Microsoft Volume Activation. You have a
Windows 7 image, which will be deployed to the company s client computers.
You deploy the image to a client computer as a test. When you log on to the client computer, a warning
states that the grace period for activation has expired.
You need to prevent the grace period from expiring before the image is deployed to the client computers.
Which command should you run?
A. Sysprep /audit
B. Sysprep /generalize
C. slmgr.vbs /ckms
D. slmgr.vbs /cpky
Answer: B

Microsoft認定証   70-681認定試験   70-681認証試験

NO.13 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You install Microsoft Deployment Toolkit (MDT) 2010 on a server named Server1. You install Microsoft
SQL Server 2008 on a server named Server2. You create an MDT deployment database for
location-specific network installations of Windows 7. Server1 and Server2 run Internet Information
Services (IIS).
You need to ensure that the MDT deployment database supports Windows integrated security from the
Windows Preinstallation Environment (Windows PE).
What should you do?
A. Create a shared folder on Server1.
B. Create a shared folder on Server2.
C. Enable Integrated Windows authentication in IIS on Server1.
D. Enable Integrated Windows authentication in IIS on Server2.
Answer: B

Microsoft認定資格   70-681   70-681   70-681問題集

NO.14 Your company uses Key Management Service (KMS) for Microsoft Volume Activation. You create a
new Windows 7 image. You deploy the image to client computers.
You need to activate the KMS client on the client computers before the client computers are shipped to
users.
Which command should you run?
A. sysprep /oobe
B. sysprep /generalize
C. slmgr.vbs /ato
D. slmgr.vbs /rearm
Answer: C

Microsoft認定試験   70-681認定資格   70-681認定試験   70-681

NO.15 You use Business Desktop Deployment (BDD) 2007 with Update 2 to prepare and deploy Windows
Vista and Office 2007 to client computers.
You install Microsoft Deployment Toolkit (MDT) 2010. The BDD deployment shares are not listed in the
Deployment Workbench.
You need to ensure that the BDD deployment shares can be used with MDT 2010.
What should you do?
A. Create new deployment shares.
B. Open the deployment shares.
C. Copy the deployment shares.
D. Close all deployment shares.
Answer: B

Microsoft練習問題   70-681認証試験   70-681   70-681

JPexamは最新の156-315.13問題集と高品質の640-916問題と回答を提供します。JPexamのMB2-866 VCEテストエンジンとCAT-340試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のJN0-696 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク：http://www.jpexam.com/70-681_exam.html

The best of Microsoft certification 70-681 exam training methods

IT-Tests's Microsoft certification 70-681 exam testing exercises is very similar with real exam questions. If you choose IT-Tests's testing practice questions and answers, we will provide you with a year of free online update service. IT-Tests.com can 100% guarantee you to pass the exam, if you fail to pass the exam, we will full refund to you.

Microsoft 70-681 certification exam is among those popular IT certifications. It is also the dream of ambitious IT professionals. This part of the candidates need to be fully prepared to allow them to get the highest score in the 70-681 exam, make their own configuration files compatible with market demand.

Exam Code: 70-681

Exam Name: Microsoft (TS: Windows 7 and Office 2010, Deploying)

As a member of the people working in the IT industry, do you have a headache for passing some IT certification exams? Generally, IT certification exams are used to test the examinee's related IT professional knowledge and experience and it is not easy pass these exams. For the examinees who are the first time to participate IT certification exam, choosing a good pertinent training program is very necessary. IT-Tests.com can offer a specific training program for many examinees participating in IT certification exams. Our training program includes simulation test before the formal examination, specific training course and the current exam which has 95% similarity with the real exam. Please add IT-Tests.com to you shopping car quickly.

We will not only ensure you to pass the exam, but also provide for you a year free update service. If you are not careful to fail to pass the examination, we will full refund to you. However, this possibility is almost not going to happen. We can 100% help you pass the exam, you can download part of practice questions from IT-Tests.com as a free try.

If you want to achieve maximum results with minimum effort in a short period of time, and want to pass the Microsoft 70-681 exam. You can use IT-Tests.com's Microsoft 70-681 exam training materials. The training materials of IT-Tests.com are the product that through the test of practice. Many candidates proved it does 100% pass the exam. With it, you will reach your goal, and can get the best results.

70-681 (TS: Windows 7 and Office 2010, Deploying) Free Demo Download: http://www.it-tests.com/70-681.html

NO.1 All client computers in your company run Volume License editions of Windows 7 and Office 2010. All
computers in the company are activated by using Key Management Service (KMS) hosts.
The company is opening a new branch office. The new branch office will not have access to the corporate
network or to the Internet for at least eight months. Windows 7 and Office 2010 have been deployed on
the client computers for the new branch office, but are not yet activated and have not been shipped.
You need to ensure that users in the new branch office will be able to use Windows 7 and Office 2010
without receiving prompts for activation.
What should you do to the new branch office client computers?
A. Enter Full Packaged Product (FPP) license keys for Windows 7 and Office 2010.
B. Enter Original Equipment Manufacturer (OEM) license keys for Windows 7 and Office 2010.
C. Activate Windows 7 and Office 2010 by using Multiple Activation Key (MAK) licenses.
D. Activate Windows 7 and Office 2010 by using the KMS hosts.
Answer: C

Microsoft   70-681 demo   70-681   70-681   70-681 answers real questions

NO.2 You have a single-domain Active Directory Domain Services (AD DS) forest. The network includes a
Windows Deployment Services (WDS) server and a separate DHCP server. You set up a multicast
transmission of Windows 7 and deploy Windows 7 on 100 new client computers via multicast. The
multicast transmission average speed is 512 KBps.
You deploy Windows 7 on an additional 50 new client computers and 2 older client computers via
multicast. The multicast transmission average speed is 56 KBps. You remove the older client computers
and restart the multicast transmission. The multicast transmission average speed is again 512 KBps.
You need to ensure that Windows 7 is deployed on all client computers via multicast and that older client
computers do not decrease the multicast average transmission speed for new client computers.
What should you do?
A. Configure multicast to separate clients into slow, medium, and fast sessions.
B. Configure multicast to automatically disconnect clients below 128 KBps.
C. Configure Multicast Address Dynamic Client Allocation Protocol (MADCAP).
D. Configure the PXE response delay to 0 seconds.
Answer: A

Microsoft   70-681 demo   70-681   70-681

NO.3 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You plan to use a server to deploy Windows 7 by using Lite Touch Installation (LTI).
You need to ensure that this server has the required software for deploying Windows 7 by using LTI. You
install Microsoft Deployment Toolkit (MDT) 2010.
What should you install next?
A. Microsoft Application Compatibility Toolkit
B. System Center Configuration Manager
C. Windows Automated Installation Kit
D. Windows Deployment Services
Answer: C

Microsoft   70-681   70-681   70-681   70-681 original questions

NO.4 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You add the Windows Deployment Services (WDS) role and the DHCP Server role to a server.
You need to ensure that client computers that boot from the network locate the WDS server automatically.
Which two actions should you perform on the WDS server? (Each correct answer presents part of the
solution. Choose two.)
A. Select the Do not listen on port 67 check box.
B. Select the Configure DHCP option 60 to indicate that this server is also a PXE server check box.
C. Click the Respond to all client computers (known and unknown) option in WDS.
D. Click the Obtain IP address from DHCP option in WDS.
Answer: AB

Microsoft test   70-681 original questions   70-681   70-681   70-681

NO.5 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008. All client computers run Windows 7. You use Microsoft Deployment Toolkit (MDT) 2010 for
your deployment infrastructure.
You need to configure your deployment infrastructure to use single-instance storage.
Which command should you run?
A. imagex /export
B. oscdimg d
C. sysprep /oobe
D. wpeutil /disableextendedcharactersforvolume
Answer: A

Microsoft   70-681   70-681   70-681 certification   70-681 test

NO.6 You are using Windows Deployment Services (WDS) to deploy Windows 7 to your company s client
computers. All servers in your network run Windows Server 2008 R2. The WDS server and the DHCP
server are running on the same computer.
You need to ensure that the client computers are able to connect to the WDS server by using PXE.
What should you do first?
A. Add option 60 to the DHCP scope.
B. Add option 64 to the DHCP scope.
C. Block WDS from listening on port 60.
D. Block WDS from listening on port 64.
Answer: A

Microsoft questions   70-681   70-681   70-681

NO.7 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You install Microsoft Deployment Toolkit (MDT) 2010 on a server named Server1. You install Microsoft
SQL Server 2008 on a server named Server2. You create an MDT deployment database for
location-specific network installations of Windows 7. Server1 and Server2 run Internet Information
Services (IIS).
You need to ensure that the MDT deployment database supports Windows integrated security from the
Windows Preinstallation Environment (Windows PE).
What should you do?
A. Create a shared folder on Server1.
B. Create a shared folder on Server2.
C. Enable Integrated Windows authentication in IIS on Server1.
D. Enable Integrated Windows authentication in IIS on Server2.
Answer: B

Microsoft test questions   70-681 exam prep   70-681 certification training   70-681 pdf

NO.8 Your company uses Key Management Service (KMS) for Microsoft Volume Activation. You create a
new Windows 7 image. You deploy the image to client computers.
You need to activate the KMS client on the client computers before the client computers are shipped to
users.
Which command should you run?
A. sysprep /oobe
B. sysprep /generalize
C. slmgr.vbs /ato
D. slmgr.vbs /rearm
Answer: C

Microsoft questions   70-681   70-681 exam prep   70-681 original questions   70-681 test

NO.9 You use Business Desktop Deployment (BDD) 2007 with Update 2 to prepare and deploy Windows
Vista and Office 2007 to client computers.
You install Microsoft Deployment Toolkit (MDT) 2010. The BDD deployment shares are not listed in the
Deployment Workbench.
You need to ensure that the BDD deployment shares can be used with MDT 2010.
What should you do?
A. Create new deployment shares.
B. Open the deployment shares.
C. Copy the deployment shares.
D. Close all deployment shares.
Answer: B

Microsoft   70-681 exam dumps   70-681 test questions

NO.10 Your company uses System Center Configuration Manager 2007 R2 for operating system deployment.
You have a boot image that was previously used to deploy Windows 7 to client computers.
You load the boot image on new client computers that contain new network adapters. The drivers for the
network adapters are not installed after the boot image is loaded.
You need to ensure that the drivers for the network adapters are properly installed during the loading of
the boot image.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install the device drivers on a target computer.
B. Install the device drivers on a reference computer.
C. Import the device drivers into the driver catalog.
D. Add the device drivers to the boot image.
Answer: CD

Microsoft study guide   70-681 questions   70-681

NO.11 Your network has one subnet for servers and one subnet for client computers. The subnets are
separated by a router. In the server subnet, Server1 is a Windows Server 2008 R2 server that runs DHCP
and DNS.
Your deployment infrastructure is configured to allow computers in the client computer subnet to boot by
using PXE. However, client computers that attempt to use PXE to boot are not able to connect to the
deployment infrastructure.
You need to ensure that client computers are able to connect to the deployment infrastructure by using
PXE.
What should you do?
A. Configure DHCP reservations.
B. Configure an IP Helper Address on the router.
C. Place a DNS server in the client computer subnet.
D. Run the netsh dhcp add server Server1 command.
Answer: B

Microsoft   70-681 exam simulations   70-681   70-681 demo   70-681 dumps

NO.12 You have an Active Directory Domain Services (AD DS) environment. All client computers run Windows
XP.
You will use Microsoft Deployment Toolkit (MDT) 2010 to deploy Windows 7 to all client computers. The
deployment project has the following requirements:
User interaction must not be required for any deployment.
You must be able to initiate deployments by using Windows Deployment Services (WDS).
You need to meet the deployment project requirements when you deploy Windows 7 by using MDT 2010.
Which application should you install?
A. Automated Deployment Services
B. Remote Installation Services
C. System Center Configuration Manager
D. System Center Operations Manager
Answer: C

Microsoft   70-681 answers real questions   70-681   70-681   70-681

NO.13 Your company uses Key Management Service (KMS) for Microsoft Volume Activation. You have a
Windows 7 image, which will be deployed to the company s client computers.
You deploy the image to a client computer as a test. When you log on to the client computer, a warning
states that the grace period for activation has expired.
You need to prevent the grace period from expiring before the image is deployed to the client computers.
Which command should you run?
A. Sysprep /audit
B. Sysprep /generalize
C. slmgr.vbs /ckms
D. slmgr.vbs /cpky
Answer: B

Microsoft   70-681 certification training   70-681   70-681   70-681

NO.14 You have a single-domain Active Directory Domain Services (AD DS) forest with two domain controllers
that run Windows Server 2008 R2. Your network consists of two subnets. All client computers are located
in one subnet. Both the DHCP server and the Windows Deployment Services (WDS) server are located in
the other subnet.
You need to ensure that client computers can be deployed over the network by using WDS.
What should you do?
A. Forward all client DHCP broadcast packets to only the DHCP server.
B. Forward all client DHCP broadcast packets to only the WDS server.
C. Forward all client DHCP broadcast packets to both the DHCP server and the WDS server.
D. Add a DNS service location (SRV) record for port 60 that is pointed toward the WDS server.
Answer: C

Microsoft certification training   70-681 exam dumps   70-681   70-681 test questions   70-681 exam dumps

NO.15 All servers in your company run Windows Server 2008. All client computers run Windows Vista and
Office 2007. Key Management Service (KMS) hosts run Windows Server 2008. All computers are
activated by using KMS.
You will deploy Windows Server 2008 R2 to all new servers, and you will deploy Windows 7 and Office
2010 to all client computers.
You need to ensure that all KMS hosts can activate all versions of Windows and Office that are used in the
company.
What should you do?
A. Install the Microsoft Office 2010 KMS Host License Pack on the KMS hosts.
B. Install Volume Activation Management Tool (VAMT) 2.0 on the KMS hosts.
C. Migrate the KMS hosts to computers that run Windows 7.
D. Migrate the KMS hosts to computers that run Windows Server 2008 R2.
Answer: D

Microsoft   70-681 practice test   70-681 certification   70-681

IT certification candidates are mostly working people. Therefore, most of the candidates did not have so much time to prepare for the exam. But they need a lot of time to participate in the certification exam training courses. This will not only lead to a waste of training costs, more importantly, the candidates wasted valuable time. Here, I recommend a good learning materials website. Some of the test data on the site is free, but more importantly is that it provides a realistic simulation exercises that can help you to pass the Microsoft 70-681 exam. IT-Tests.com Microsoft 70-681 exammaterials can not only help you save a lot of time. but also allows you to pass the exam successfully. So you have no reason not to choose it.