Altiris 60-DSFA680認定試験の過去問を探しているならコレを使おう

ITテストと認定は当面の競争が激しい世界でこれまで以上に重要になりました。それは異なる世界の未来を意味しています。Altirisの60-DSFA680の試験はあなたの職場生涯で重要な画期的な出来事になり、新しいチャンスを発見するかもしれません。ところが、Altirisの60-DSFA680の試験にどうやって合格しますか。心配することはないですよ、ヘルプがあなたの手元にありますから。JPexamを利用したら恐いことはないです。JPexamのAltirisの60-DSFA680の試験問題と解答は試験準備のパイオニアですから。

あなたのキャリアでいくつかの輝かしい業績を行うことを望まないのですか。きっとそれを望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。では、IT業種で仕事しているあなたはどうやって自分のレベルを高めるべきですか。実は、60-DSFA680認定試験を受験して認証資格を取るのは一つの良い方法です。Altirisの認定試験の60-DSFA680資格は非常に大切なものですから、Altirisの試験を受ける人もますます多くなっています。

JPexamはきみのIT夢に向かって力になりますよ。Altirisの60-DSFA680の認証そんなに人気があって、JPexamも君の試験に合格するために全力で助けてあげて、またあなたを一年の無料なサービスの更新を提供します。明日の成功のためにJPexamを選らばましょう。

試験番号：60-DSFA680問題集
試験科目：Altiris Deployment Solution Foundation 6.8
最近更新時間：2014-02-21
問題と解答：全99問
100％の返金保証。1年間の無料アップデート。

Altirisの60-DSFA680認定試験を受験する気があるのですか。この試験を受けた身の回りの人がきっと多くいるでしょう。これは非常に大切な試験で、試験に合格して60-DSFA680認証資格を取ると、あなたは多くのメリットを得られますから。では、他の人を頼んで試験に合格する対策を教えてもらったのですか。試験に準備する方法が色々ありますが、最も高効率なのは、きっと良いツールを利用することですね。ところで、あなたにとってどんなツールが良いと言えるのですか。もちろんJPexamの60-DSFA680問題集です。

みなさんにJPexamを選ぶのはより安心させるためにJPexamは部分のAltiris 60-DSFA680試験材料がネットで提供して、君が無料でダウンロードすることができます。安心に弊社の商品を選ぶとともに貴重な時間とエネルギーを節約することができる。JPexamは真実のAltiris 60-DSFA680認証試験の問題集が100%で君の試験の合格を保証します。君の明るい将来を祈っています。

弊社が提供した部分の資料を試用してから、決断を下ろしてください。もし弊社を選ばれば、１００％の合格率を保証でございます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/60-DSFA680_exam.html

NO.1 You have deployed a hardware independent image to an ACPI Uniprocessor computer and now the
computer will not start.
What is the probable cause?
A. the wrong hardware abstraction layer (HAL) was deployed
B. Sysprep was not run on the source computer
C. the ACPI Uniprocessor computer does not support hardware independent images
D. a clean Windows installation was not performed on the source computer before creating the hardware
independent image.
Answer: A

Altiris問題集   60-DSFA680認定試験   60-DSFA680

NO.2 AClient (on a managed computer) has been configured to use a multicast packet to locate the
Deployment Server.
Which statement is now true?
A. moving this computer to a different Deployment System requires the AClient agent be reconfigured
B. images can be sent using unicast packets or multicast packets
C. this setting configures images to be sent to the computer using multicasting technology
D. the Deployment Server must be configured to obtain its IP address from a DHCP server
Answer: B

Altiris   60-DSFA680認証試験   60-DSFA680

NO.3 Deployment Solution's Simple Install Helper will check for and install which required third-party
software? (Choose two.)
A. Java
B. DirectX
C. ActiveX
D. .NET framework
E. Pre-boot automation operating systems
F. SQL
Answer: DF

Altiris認定資格   60-DSFA680認定試験   60-DSFA680参考書   60-DSFA680

NO.4 When capturing a computer's personality, the application settings used for this process are located in
which file type?
A. .INI
B. .A2I
C. .ASI
D. .PBT
Answer: B

Altiris   60-DSFA680認定試験   60-DSFA680   60-DSFA680認定資格

NO.5 Which Altiris utility creates the necessary media to run the Initial Deployment job from a CD?
A. ImageExplorer
B. RapiDeploy
C. PXE Configuration Utility
D. Initial Deployment Configuration Utility
E. Boot Disk Creator
Answer: E

Altiris過去問   60-DSFA680過去問   60-DSFA680   60-DSFA680

NO.6 You can use _____ to ensure that your PXE servers are servicing the correct managed computers.
A. IP blocking
B. Conditions
C. MAC filtering
D. NetBIOS name recognition
Answer: C

Altiris認定資格   60-DSFA680   60-DSFA680   60-DSFA680問題集   60-DSFA680

NO.7 You are using the Deployment Console's New Job Wizard to migrate a computer's personality from
one computer to different computer.
What happens to the names of these two computers during this process?
A. The destination computer is automatically given a new unique name.
B. The source computer is automatically renamed and the destination computer gets the original name of
the source computer.
C. The two computers will end up with identical names, therefore you must rename one of the computers
manually.
Answer: B

Altiris過去問   60-DSFA680参考書   60-DSFA680認証試験   60-DSFA680   60-DSFA680

NO.8 AClient has been installed on your Windows XP managed computers.
Which three methods can be used to change the settings AClient is currently using? (Choose three.)
A. from the Deployment Console, right-click on the computer and select Change Agent Settings
B. from the Deployment Console, select Tools > AClient > Configurations
C. from the managed computer, select Start > All Programs > Altiris > AClient > Configuration
D. from the managed computer, double-click the AClient icon located in the system tray and select
Properties
E. from the Deployment Console, double-click on a computer and edit the client properties
F. use the Deployment Console to reinstall AClient with the desired settings
Answer: ADF

Altiris認定資格   60-DSFA680   60-DSFA680   60-DSFA680

NO.9 How does a Deployment Solution job let you work with software virtualization layers? (Choose two.)
A. layers can be imported to a managed computer
B. layers can be created
C. the state of a layer can be managed (activated, deactivated, and so forth)
D. the content of a layer can be modified
Answer: AC

Altiris認定試験   60-DSFA680過去問   60-DSFA680認定資格   60-DSFA680   60-DSFA680認定資格

NO.10 While imaging computers, Deployment Solution supports the use of UNDI drivers.
Which UNDI driver statements are true? (Choose two.)
A. UNDI drivers are written specifically to work with the Altiris automation process.
B. UNDI drivers must be downloaded and installed from Intel's Web site before they can be used.
C. UNDI drivers let you image computers without obtaining a specific manufacturer's network driver for
each network card.
D. UNDI drivers do not support multicasting of hard disk images across the entire network.
E. UNDI drivers support multicasting of hard disk images across the entire network.
Answer: CD

Altiris   60-DSFA680認証試験   60-DSFA680問題集

NO.11 AClient has not been password protected.
Which three tasks can be performed after right-clicking on the AClient icon from a managed computer?
(Choose three.)
A. initiate Microsoft's Sysprep Utility in preparation for imaging
B. view the AClient log file when log files have been enabled
C. change the name of the managed computer as it appears in the Deployment Console
D. change the NetBIOS name of the managed computer
E. monitor AClient's communication with the Deployment Server
F. reinstall AClient
G. edit the AClient template file
Answer: BCE

Altiris   60-DSFA680練習問題   60-DSFA680認定証   60-DSFA680   60-DSFA680過去問

NO.12 Which statement about deploying computer image files is true?
A. The RDeploy switch used to preserve existing partitions is enabled by default.
B. Aborting the deployment process (after imaging as started) corrupts the destination computer's hard
drive.
C. The maximum space required on the destination hard drive is equal to the size of the image file.
D. The imaging process is non-destructive, and adds data to what is already stored on an existing hard
drive partition.
Answer: B

Altiris   60-DSFA680   60-DSFA680認定試験   60-DSFA680認証試験

NO.13 Which utility removes the security ID (SID) before making an image of a computer?
A. SIDgenerator
B. SetupCapture
C. Sysprep
D. ImageExplorer
E. SIDconfig
Answer: C

Altiris過去問   60-DSFA680   60-DSFA680

NO.14 Which Deployment Solution component stores the main Deployment System program files?
A. Deployment Server
B. Deployment Database
C. Deployment Share
D. Microsoft DHCP Server
E. Deployment PXE Server
F. Deployment Console
Answer: C

Altiris認定証   60-DSFA680   60-DSFA680練習問題

NO.15 Deployment Agents (such as AClient) can be installed on remote computers using the Remote Agent
Installer, but only when the remote computers are running which four operating systems? (Choose four.)
A. Windows 2000
B. Windows 95
C. Windows NT
D. Windows XP
E. Windows 2003
F. Linux
G. Windows 98
Answer: ACDE

Altiris   60-DSFA680   60-DSFA680

NO.16 Which Deployment Console method lets you work with software virtualization layers?
A. using a Deployment job
B. selecting Tools > Software Virtualization
C. right-clicking on a computer and selecting Software Virtualization > Manage Layers
Answer: A

Altiris   60-DSFA680認定資格   60-DSFA680過去問   60-DSFA680   60-DSFA680認定試験

NO.17 When using Altiris PXE servers in a Deployment System, which PXE statement is true?
A. Multiple PXE servers can only be installed if a router separates them.
B. If a PXE server is configured to delay its response, it will respond only if no other PXE server responds
immediately.
C. A managed computer only uses the first PXE server it hears from.
D. Configuring multiple PXE servers to respond immediately causes errors on the managed computers.
Answer: C

Altiris   60-DSFA680   60-DSFA680   60-DSFA680認定試験

NO.18 When using the DOS operating system, image files with an .EXE file extension _____?
A. cannot be deployed using a Deployment job
B. must be converted to .IMG before they can be deployed with a Deployment job
C. cannot be converted to .IMG files
D. can be deployed without using additional Altiris imaging software
Answer: D

Altiris   60-DSFA680   60-DSFA680

NO.19 Which program lets you edit image files after they have been created?
A. ImgViewer
B. ImageExplorer
C. ImageEditor
D. ImageManager
E. ImgManager
Answer: B

Altiris   60-DSFA680認定試験   60-DSFA680練習問題   60-DSFA680認証試験   60-DSFA680問題集

NO.20 Which required symbol identifies the opening and closing of a Deployment token?
A. %
B. #
C. $
D. *
Answer: A

Altiris認定資格   60-DSFA680認定資格   60-DSFA680   60-DSFA680認定資格   60-DSFA680認定資格   60-DSFA680練習問題

JPexamは最新の000-657問題集と高品質のMB6-872問題と回答を提供します。JPexamのEN0-001 VCEテストエンジンと000-596試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-N32 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク：http://www.jpexam.com/60-DSFA680_exam.html

Altiris certification 60-DSFA680 exam best training materials

IT-Tests.com's Altiris 60-DSFA680 exam training material is the best training materials on the Internet. It is the leader in all training materials. It not only can help you to pass the exam , you can also improve your knowledge and skills. Help you in your career in your advantage successfully. As long as you have the Altiris 60-DSFA680 certification, you will be treated equally by all countries.

IT-Tests.com's Altiris 60-DSFA680 exam training materials is virtually risk-free for you at the time of purchase. Before you buy, you can enter IT-Tests.com website to download the free part of the exam questions and answers as a trial. So you can see the quality of the exam materials and we IT-Tests.comis friendly web interface. We also offer a year of free updates. If you do not pass the exam, we will refund the full cost to you. We absolutely protect the interests of consumers. Training materials provided by IT-Tests.com are very practical, and they are absolutely right for you. We can make you have a financial windfall.

If you are interested in IT-Tests's training program about Altiris certification 60-DSFA680 exam, you can first on WWW.IT-Tests.COM to free download part of the exercises and answers about Altiris certification 60-DSFA680 exam as a free try. We will provide one year free update service for those customers who choose IT-Tests's products.

Altiris 60-DSFA680 authentication certificate is the dream IT certificate of many people. Altiris certification 60-DSFA680 exam is a examination to test the examinees' IT professional knowledge and experience, which need to master abundant IT knowledge and experience to pass. In order to grasp so much knowledge, generally, it need to spend a lot of time and energy to review many books. IT-Tests.com is a website which can help you save time and energy to rapidly and efficiently master the Altiris certification 60-DSFA680 exam related knowledge. If you are interested in IT-Tests, you can first free download part of IT-Tests's Altiris certification 60-DSFA680 exam exercises and answers on the Internet as a try.

Exam Code: 60-DSFA680
Exam Name: Altiris Altiris Deployment Solution Foundation 6.8 60-DSFA680
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Updated: 2013-08-28

IT-Tests.com's Altiris 60-DSFA680 exam training materials are the best training materials of all the Internet training resources. Our visibility is very high, which are results that obtained through many candidates who have used the IT-Tests.com's Altiris 60-DSFA680 exam training materials. If you also use IT-Tests.com's Altiris 60-DSFA680 exam training materials, we can give you 100% guarantee of success. If you do not pass the exam, we will refund the full purchase cost to you . For the vital interests of the majority of candidates, IT-Tests.com is absolutely trustworthy.

If you want to buy Altiris 60-DSFA680 exam study guide online services, then we IT-Tests.com is one of the leading service provider's site. . These training products to help you pass the exam, we guarantee to refund the full purchase cost. Our website provide all the study materials and other training materials on the site and each one enjoy one year free update facilities. If these training products do not help you pass the exam, we guarantee to refund the full purchase cost.

60-DSFA680 (Altiris Deployment Solution Foundation 6.8) Free Demo Download: http://www.it-tests.com/60-DSFA680.html

NO.1 Which Deployment Console method lets you work with software virtualization layers?
A. using a Deployment job
B. selecting Tools > Software Virtualization
C. right-clicking on a computer and selecting Software Virtualization > Manage Layers
Answer: A

Altiris questions   60-DSFA680   60-DSFA680   60-DSFA680   60-DSFA680 exam

NO.2 You have deployed a hardware independent image to an ACPI Uniprocessor computer and now the
computer will not start.
What is the probable cause?
A. the wrong hardware abstraction layer (HAL) was deployed
B. Sysprep was not run on the source computer
C. the ACPI Uniprocessor computer does not support hardware independent images
D. a clean Windows installation was not performed on the source computer before creating the hardware
independent image.
Answer: A

Altiris   60-DSFA680 exam dumps   60-DSFA680

NO.3 While imaging computers, Deployment Solution supports the use of UNDI drivers.
Which UNDI driver statements are true? (Choose two.)
A. UNDI drivers are written specifically to work with the Altiris automation process.
B. UNDI drivers must be downloaded and installed from Intel's Web site before they can be used.
C. UNDI drivers let you image computers without obtaining a specific manufacturer's network driver for
each network card.
D. UNDI drivers do not support multicasting of hard disk images across the entire network.
E. UNDI drivers support multicasting of hard disk images across the entire network.
Answer: CD

Altiris original questions   60-DSFA680 study guide   60-DSFA680   60-DSFA680

NO.4 Which required symbol identifies the opening and closing of a Deployment token?
A. %
B. #
C. $
D. *
Answer: A

Altiris   60-DSFA680   60-DSFA680 questions   60-DSFA680 practice test

NO.5 AClient has not been password protected.
Which three tasks can be performed after right-clicking on the AClient icon from a managed computer?
(Choose three.)
A. initiate Microsoft's Sysprep Utility in preparation for imaging
B. view the AClient log file when log files have been enabled
C. change the name of the managed computer as it appears in the Deployment Console
D. change the NetBIOS name of the managed computer
E. monitor AClient's communication with the Deployment Server
F. reinstall AClient
G. edit the AClient template file
Answer: BCE

Altiris   60-DSFA680   60-DSFA680   60-DSFA680   60-DSFA680 study guide

NO.6 When using the DOS operating system, image files with an .EXE file extension _____?
A. cannot be deployed using a Deployment job
B. must be converted to .IMG before they can be deployed with a Deployment job
C. cannot be converted to .IMG files
D. can be deployed without using additional Altiris imaging software
Answer: D

Altiris demo   60-DSFA680 answers real questions   60-DSFA680   60-DSFA680 answers real questions

NO.7 Which utility removes the security ID (SID) before making an image of a computer?
A. SIDgenerator
B. SetupCapture
C. Sysprep
D. ImageExplorer
E. SIDconfig
Answer: C

Altiris   60-DSFA680 questions   60-DSFA680 exam simulations

NO.8 You are using the Deployment Console's New Job Wizard to migrate a computer's personality from
one computer to different computer.
What happens to the names of these two computers during this process?
A. The destination computer is automatically given a new unique name.
B. The source computer is automatically renamed and the destination computer gets the original name of
the source computer.
C. The two computers will end up with identical names, therefore you must rename one of the computers
manually.
Answer: B

Altiris demo   60-DSFA680   60-DSFA680 exam prep

NO.9 Which Deployment Solution component stores the main Deployment System program files?
A. Deployment Server
B. Deployment Database
C. Deployment Share
D. Microsoft DHCP Server
E. Deployment PXE Server
F. Deployment Console
Answer: C

Altiris   60-DSFA680 answers real questions   60-DSFA680

NO.10 When using Altiris PXE servers in a Deployment System, which PXE statement is true?
A. Multiple PXE servers can only be installed if a router separates them.
B. If a PXE server is configured to delay its response, it will respond only if no other PXE server responds
immediately.
C. A managed computer only uses the first PXE server it hears from.
D. Configuring multiple PXE servers to respond immediately causes errors on the managed computers.
Answer: C

Altiris   60-DSFA680   60-DSFA680   60-DSFA680 certification

NO.11 Which statement about deploying computer image files is true?
A. The RDeploy switch used to preserve existing partitions is enabled by default.
B. Aborting the deployment process (after imaging as started) corrupts the destination computer's hard
drive.
C. The maximum space required on the destination hard drive is equal to the size of the image file.
D. The imaging process is non-destructive, and adds data to what is already stored on an existing hard
drive partition.
Answer: B

Altiris braindump   60-DSFA680   60-DSFA680 exam simulations   60-DSFA680 exam prep

NO.12 Deployment Agents (such as AClient) can be installed on remote computers using the Remote Agent
Installer, but only when the remote computers are running which four operating systems? (Choose four.)
A. Windows 2000
B. Windows 95
C. Windows NT
D. Windows XP
E. Windows 2003
F. Linux
G. Windows 98
Answer: ACDE

Altiris   60-DSFA680 certification   60-DSFA680   60-DSFA680   60-DSFA680

NO.13 AClient has been installed on your Windows XP managed computers.
Which three methods can be used to change the settings AClient is currently using? (Choose three.)
A. from the Deployment Console, right-click on the computer and select Change Agent Settings
B. from the Deployment Console, select Tools > AClient > Configurations
C. from the managed computer, select Start > All Programs > Altiris > AClient > Configuration
D. from the managed computer, double-click the AClient icon located in the system tray and select
Properties
E. from the Deployment Console, double-click on a computer and edit the client properties
F. use the Deployment Console to reinstall AClient with the desired settings
Answer: ADF

Altiris   60-DSFA680 certification   60-DSFA680   60-DSFA680 exam simulations   60-DSFA680

NO.14 Which program lets you edit image files after they have been created?
A. ImgViewer
B. ImageExplorer
C. ImageEditor
D. ImageManager
E. ImgManager
Answer: B

Altiris   60-DSFA680 questions   60-DSFA680 test questions   60-DSFA680 study guide

NO.15 Deployment Solution's Simple Install Helper will check for and install which required third-party
software? (Choose two.)
A. Java
B. DirectX
C. ActiveX
D. .NET framework
E. Pre-boot automation operating systems
F. SQL
Answer: DF

Altiris   60-DSFA680 study guide   60-DSFA680 dumps   60-DSFA680

NO.16 How does a Deployment Solution job let you work with software virtualization layers? (Choose two.)
A. layers can be imported to a managed computer
B. layers can be created
C. the state of a layer can be managed (activated, deactivated, and so forth)
D. the content of a layer can be modified
Answer: AC

Altiris original questions   60-DSFA680 exam prep   60-DSFA680   60-DSFA680 test answers

NO.17 AClient (on a managed computer) has been configured to use a multicast packet to locate the
Deployment Server.
Which statement is now true?
A. moving this computer to a different Deployment System requires the AClient agent be reconfigured
B. images can be sent using unicast packets or multicast packets
C. this setting configures images to be sent to the computer using multicasting technology
D. the Deployment Server must be configured to obtain its IP address from a DHCP server
Answer: B

Altiris practice test   60-DSFA680   60-DSFA680 test answers   60-DSFA680

NO.18 Which Altiris utility creates the necessary media to run the Initial Deployment job from a CD?
A. ImageExplorer
B. RapiDeploy
C. PXE Configuration Utility
D. Initial Deployment Configuration Utility
E. Boot Disk Creator
Answer: E

Altiris   60-DSFA680 exam dumps   60-DSFA680   60-DSFA680   60-DSFA680 exam dumps

NO.19 When capturing a computer's personality, the application settings used for this process are located in
which file type?
A. .INI
B. .A2I
C. .ASI
D. .PBT
Answer: B

Altiris   60-DSFA680 questions   60-DSFA680   60-DSFA680   60-DSFA680   60-DSFA680

NO.20 You can use _____ to ensure that your PXE servers are servicing the correct managed computers.
A. IP blocking
B. Conditions
C. MAC filtering
D. NetBIOS name recognition
Answer: C

Altiris   60-DSFA680   60-DSFA680

If you think you can face unique challenges in your career, you should pass the Altiris 60-DSFA680 exam. IT-Tests.com is a site that comprehensively understand the Altiris 60-DSFA680 exam. Using our exclusive online Altiris 60-DSFA680 exam questions and answers, will become very easy to pass the exam. IT-Tests.com guarantee 100% success. IT-Tests.com is recognized as the leader of a professional certification exam, it provides the most comprehensive certification standard industry training methods. You will find that IT-Tests.com Altiris 60-DSFA680 exam questions and answers are most thorough and the most accurate questions on the market and up-to-date practice test. When you have IT-Tests.com Altiris 60-DSFA680 questions and answers, it will allow you to have confidence in passing the exam the first time.

Altiris 060-DSFA680 for the latest training materials

Altiris 060-DSFA680 is a certification exam to test IT professional knowledge. IT-Tests.com is a website which can help you quickly pass the Altiris certification 060-DSFA680 exams. Before the exam, you use pertinence training and test exercises and answers that we provide, and in a short time you'll have a lot of harvest.

If you're still studying hard to pass the Altiris 060-DSFA680 exam, IT-Tests.com help you to achieve your dream. We provide you with the best Altiris 060-DSFA680 exam materials. It passed the test of practice, and with the best quality. It is better than Altiris 060-DSFA680 tutorials and any other related materials. It can help you to pass the Altiris 060-DSFA680 exam, and help you to become a strong IT expert.

Having a Altiris 060-DSFA680 certification can enhance your employment prospects,and then you can have a lot of good jobs. IT-Tests.com is a website very suitable to candidates who participate in the Altiris certification 060-DSFA680 exam. IT-Tests.com can not only provide all the information related to the Altiris certification 060-DSFA680 exam for the candidates, but also provide a good learning opportunity for them. IT-Tests.com be able to help you pass Altiris certification 060-DSFA680 exam successfully.

Exam Code: 060-DSFA680

Exam Name: Altiris (Altiris Deployment Solution Foundation 6.8)

There are many ways to help you pass Altiris certification 060-DSFA680 exam and selecting a good pathway is a good protection. IT-Tests.com can provide you a good training tool and high-quality reference information for you to participate in the Altiris certification 060-DSFA680 exam. IT-Tests's practice questions and answers are based on the research of Altiris certification 060-DSFA680 examination Outline. Therefore, the high quality and high authoritative information provided by IT-Tests.com can definitely do our best to help you pass Altiris certification 060-DSFA680 exam. IT-Tests.com will continue to update the information about Altiris certification 060-DSFA680 exam to meet your need.

060-DSFA680 (Altiris Deployment Solution Foundation 6.8) Free Demo Download: http://www.it-tests.com/060-DSFA680.html

NO.1 Which Altiris utility creates the necessary media to run the Initial Deployment job from a CD?
A. ImageExplorer
B. RapiDeploy
C. PXE Configuration Utility
D. Initial Deployment Configuration Utility
E. Boot Disk Creator
Answer: E

Altiris exam dumps   060-DSFA680   060-DSFA680 test

NO.2 Which Deployment Solution component stores the main Deployment System program files?
A. Deployment Server
B. Deployment Database
C. Deployment Share
D. Microsoft DHCP Server
E. Deployment PXE Server
F. Deployment Console
Answer: C

Altiris   060-DSFA680 certification   060-DSFA680   060-DSFA680 exam prep   060-DSFA680 practice test   060-DSFA680

NO.3 Deployment Agents (such as AClient) can be installed on remote computers using the Remote Agent
Installer, but only when the remote computers are running which four operating systems? (Choose four.)
A. Windows 2000
B. Windows 95
C. Windows NT
D. Windows XP
E. Windows 2003
F. Linux
G. Windows 98
Answer: ACDE

Altiris   060-DSFA680 test questions   060-DSFA680 braindump   060-DSFA680 questions   060-DSFA680

NO.4 You can use _____ to ensure that your PXE servers are servicing the correct managed computers.
A. IP blocking
B. Conditions
C. MAC filtering
D. NetBIOS name recognition
Answer: C

Altiris   060-DSFA680 exam simulations   060-DSFA680

NO.5 Which utility removes the security ID (SID) before making an image of a computer?
A. SIDgenerator
B. SetupCapture
C. Sysprep
D. ImageExplorer
E. SIDconfig
Answer: C

Altiris   060-DSFA680   060-DSFA680 test questions   060-DSFA680 exam simulations   060-DSFA680   060-DSFA680 questions

NO.6 AClient (on a managed computer) has been configured to use a multicast packet to locate the
Deployment Server.
Which statement is now true?
A. moving this computer to a different Deployment System requires the AClient agent be reconfigured
B. images can be sent using unicast packets or multicast packets
C. this setting configures images to be sent to the computer using multicasting technology
D. the Deployment Server must be configured to obtain its IP address from a DHCP server
Answer: B

Altiris   060-DSFA680 dumps   060-DSFA680 certification   060-DSFA680

NO.7 When using the DOS operating system, image files with an .EXE file extension _____?
A. cannot be deployed using a Deployment job
B. must be converted to .IMG before they can be deployed with a Deployment job
C. cannot be converted to .IMG files
D. can be deployed without using additional Altiris imaging software
Answer: D

Altiris   060-DSFA680 answers real questions   060-DSFA680   060-DSFA680

NO.8 Deployment Solution's Simple Install Helper will check for and install which required third-party
software? (Choose two.)
A. Java
B. DirectX
C. ActiveX
D. .NET framework
E. Pre-boot automation operating systems
F. SQL
Answer: DF

Altiris   060-DSFA680 braindump   060-DSFA680

NO.9 Which Deployment Console method lets you work with software virtualization layers?
A. using a Deployment job
B. selecting Tools > Software Virtualization
C. right-clicking on a computer and selecting Software Virtualization > Manage Layers
Answer: A

Altiris   060-DSFA680   060-DSFA680 exam simulations   060-DSFA680

NO.10 When using Altiris PXE servers in a Deployment System, which PXE statement is true?
A. Multiple PXE servers can only be installed if a router separates them.
B. If a PXE server is configured to delay its response, it will respond only if no other PXE server responds
immediately.
C. A managed computer only uses the first PXE server it hears from.
D. Configuring multiple PXE servers to respond immediately causes errors on the managed computers.
Answer: C

Altiris original questions   060-DSFA680 pdf   060-DSFA680 pdf   060-DSFA680 study guide

NO.11 When capturing a computer's personality, the application settings used for this process are located in
which file type?
A. .INI
B. .A2I
C. .ASI
D. .PBT
Answer: B

Altiris demo   060-DSFA680   060-DSFA680

NO.12 While imaging computers, Deployment Solution supports the use of UNDI drivers.
Which UNDI driver statements are true? (Choose two.)
A. UNDI drivers are written specifically to work with the Altiris automation process.
B. UNDI drivers must be downloaded and installed from Intel's Web site before they can be used.
C. UNDI drivers let you image computers without obtaining a specific manufacturer's network driver for
each network card.
D. UNDI drivers do not support multicasting of hard disk images across the entire network.
E. UNDI drivers support multicasting of hard disk images across the entire network.
Answer: CD

Altiris certification training   060-DSFA680 certification   060-DSFA680   060-DSFA680

NO.13 Which required symbol identifies the opening and closing of a Deployment token?
A. %
B. #
C. $
D. *
Answer: A

Altiris   060-DSFA680   060-DSFA680   060-DSFA680

NO.14 Which program lets you edit image files after they have been created?
A. ImgViewer
B. ImageExplorer
C. ImageEditor
D. ImageManager
E. ImgManager
Answer: B

Altiris practice test   060-DSFA680   060-DSFA680   060-DSFA680   060-DSFA680 answers real questions   060-DSFA680 certification

NO.15 You are using the Deployment Console's New Job Wizard to migrate a computer's personality from
one computer to different computer.
What happens to the names of these two computers during this process?
A. The destination computer is automatically given a new unique name.
B. The source computer is automatically renamed and the destination computer gets the original name of
the source computer.
C. The two computers will end up with identical names, therefore you must rename one of the computers
manually.
Answer: B

Altiris   060-DSFA680   060-DSFA680   060-DSFA680

NO.16 How does a Deployment Solution job let you work with software virtualization layers? (Choose two.)
A. layers can be imported to a managed computer
B. layers can be created
C. the state of a layer can be managed (activated, deactivated, and so forth)
D. the content of a layer can be modified
Answer: AC

Altiris   060-DSFA680   060-DSFA680   060-DSFA680 study guide   060-DSFA680   060-DSFA680 certification training

NO.17 AClient has not been password protected.
Which three tasks can be performed after right-clicking on the AClient icon from a managed computer?
(Choose three.)
A. initiate Microsoft's Sysprep Utility in preparation for imaging
B. view the AClient log file when log files have been enabled
C. change the name of the managed computer as it appears in the Deployment Console
D. change the NetBIOS name of the managed computer
E. monitor AClient's communication with the Deployment Server
F. reinstall AClient
G. edit the AClient template file
Answer: BCE

Altiris   060-DSFA680 certification training   060-DSFA680   060-DSFA680

NO.18 Which statement about deploying computer image files is true?
A. The RDeploy switch used to preserve existing partitions is enabled by default.
B. Aborting the deployment process (after imaging as started) corrupts the destination computer's hard
drive.
C. The maximum space required on the destination hard drive is equal to the size of the image file.
D. The imaging process is non-destructive, and adds data to what is already stored on an existing hard
drive partition.
Answer: B

Altiris demo   060-DSFA680   060-DSFA680   060-DSFA680 study guide   060-DSFA680

NO.19 You have deployed a hardware independent image to an ACPI Uniprocessor computer and now the
computer will not start.
What is the probable cause?
A. the wrong hardware abstraction layer (HAL) was deployed
B. Sysprep was not run on the source computer
C. the ACPI Uniprocessor computer does not support hardware independent images
D. a clean Windows installation was not performed on the source computer before creating the hardware
independent image.
Answer: A

Altiris   060-DSFA680 questions   060-DSFA680 practice test   060-DSFA680

NO.20 AClient has been installed on your Windows XP managed computers.
Which three methods can be used to change the settings AClient is currently using? (Choose three.)
A. from the Deployment Console, right-click on the computer and select Change Agent Settings
B. from the Deployment Console, select Tools > AClient > Configurations
C. from the managed computer, select Start > All Programs > Altiris > AClient > Configuration
D. from the managed computer, double-click the AClient icon located in the system tray and select
Properties
E. from the Deployment Console, double-click on a computer and edit the client properties
F. use the Deployment Console to reinstall AClient with the desired settings
Answer: ADF

Altiris certification training   060-DSFA680 exam prep   060-DSFA680 test   060-DSFA680

Life is full of choices. Selection does not necessarily bring you happiness, but to give you absolute opportunity. Once missed selection can only regret. IT-Tests.com's Altiris 060-DSFA680 exam training materials are necessary to every IT person. With this materials, all of the problems about the Altiris 060-DSFA680 will be solved. IT-Tests.com's Altiris 060-DSFA680 exam training materials have wide coverage, and update speed. This is the most comprehensive training materials. With it, all the IT certifications need not fear, because you will pass the exam.