高品質なHP HP0-Y35認定試験の問題集を入手しよう

もし君がHPのHP0-Y35に参加すれば、良い学習のツルを選ぶすべきです。HPのHP0-Y35認定試験はIT業界の中でとても重要な認証試験で、合格するために良い訓練方法で準備をしなければなりません。。

JPexamのHP0-Y35問題集というものをきっと聞いたことがあるでしょう。でも、利用したことがありますか。「JPexamのHP0-Y35問題集は本当に良い教材です。おかげで試験に合格しました。」という声がよく聞こえています。JPexamは問題集を利用したことがある多くの人々からいろいろな好評を得ました。それはJPexamはたしかに受験生の皆さんを大量な時間を節約させ、順調に試験に合格させることができますから。

JPexam はプロなウェブサイトで、受験生の皆さんに質の高いサービスを提供します。プリセールス.サービスとアフターサービスに含まれているのです。JPexamのHPのHP0-Y35試験トレーニング資料を必要としたら、まず我々の無料な試用版の問題と解答を使ってみることができます。そうしたら、この資料があなたに適用するかどうかを確かめてから購入することができます。JPexamのHPのHP0-Y35試験トレーニング資料を利用してから失敗になりましたら、当社は全額で返金します。それに、一年間の無料更新サービスを提供することができます。

試験番号：HP0-Y35問題集
試験科目：Wireless Networks - ASE 2011 Delta Exam
最近更新時間：2014-03-07
問題と解答：全75問
100％の返金保証。1年間の無料アップデート。

HP HP0-Y35認証試験に合格することが簡単ではなくて、HP HP0-Y35証明書は君にとってはIT業界に入るの一つの手づるになるかもしれません。しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。

HPのHP0-Y35認証試験の合格証は多くのIT者になる夢を持つ方がとりたいです。でも、その試験はITの専門知識と経験が必要なので、合格するために一般的にも大量の時間とエネルギーをかからなければならなくて、助簡単ではありません。JPexamは素早く君のHP試験に関する知識を補充できて、君の時間とエネルギーが節約させるウェブサイトでございます。JPexamのことに興味があったらネットで提供した部分資料をダウンロードしてください。

あなたの目標はとても高いですから、あなたに色々なヘルプをあげられる資料が必要です。JPexam HPのHP0-Y35試験問題集はあなたが自分の目標を達成することを助けられます。JPexam HPのHP0-Y35問題資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。当社の製品は、すべての可能性のある問題を試させられます。受験生の皆様に問題の１００パーセント真実な解答を提供することを保証します。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/HP0-Y35_exam.html

NO.1 Which roles are supported by the sFlow standard?
A. agent and collector only
B. probe and collector only
C. agent, collector, and analyzer
D. probe, collector, and analyzer
Answer: A

HP   HP0-Y35   HP0-Y35   HP0-Y35   HP0-Y35認定資格

NO.2 Which protocols/technologies can be used to implement IRF MAD? (Select two.)
A. NSF/GR
B. ICMP
C. IGMP
D. BFD
E. LACP
Answer: D,E

HP   HP0-Y35   HP0-Y35

NO.3 Click the Exhibit button.
You have been asked to configure the switching engine of an HP A3000-24G PoE+ Wireless
Switch. First, you log in to the CLI of the access controller and then move to the System view. You
then attempt to issue the partial command oap co and use the Tab key to complete it. However,
the CLI does not complete the command but issues a line return instead, as shown in the exhibit.
What must you do to connect to the CLI of the switching engine?
A. Return to the User view and then issue the command.
B. Enter the OAP view and then issue the command.
C. Use the CTRL+K key combination to access the CLI of the switching engine.
D. Telnet directly to the IPaddress of the switching engine and issue the command.
Answer: A

HP   HP0-Y35認証試験   HP0-Y35認証試験   HP0-Y35参考書

NO.4 Using HP A5800 switches, which element must be configured in all switches involved in Layer 2
remote port mirroring?
A. remote-mirroring group
B. mirroring-ingress port
C. monitor-egress port
D. remote-probe VLAN
Answer: D

HP   HP0-Y35練習問題   HP0-Y35   HP0-Y35認証試験   HP0-Y35練習問題   HP0-Y35参考書

NO.5 You have been asked to deploy an additional HP A-Series wireless access point in the conference room
of an advertising agency. You connect to the CLI of the access controller and create an AP management
template. In which view do you specify the serial number of the access point?
A. Radio view
B. Service Template view
C. AP view
D. ESS Interface view
Answer: C

HP   HP0-Y35過去問   HP0-Y35   HP0-Y35   HP0-Y35   HP0-Y35

NO.6 Click the Exhibit button.
When IRF with Distributed Link Aggregation is implemented at all layers of a LAN (Core,
Aggregation, and Access), which protocols can be replaced by IRF functions? (Select two.)
A. MSTP
B. LACP
C. BFD
D. NSF/GR
E. VRRP
Answer: A,E

HP過去問   HP0-Y35参考書   HP0-Y35

NO.7 In an IRF stack, which operational plane is centralized (in the Master) and which is distributed
(among all members)?
A. Management: centralized
Control: centralized
Forwarding: centralized
B. Management: distributed
Control: distributed
Forwarding: distributed
C. Management: centralized
Control: distributed
Forwarding: distributed
D. Management: distributed
Control: centralized
Forwarding: distributed
E. Management: centralized
Control: centralized
Forwarding: distributed
Answer: E

HP参考書   HP0-Y35認定資格   HP0-Y35   HP0-Y35問題集

NO.8 Click the Exhibit button.
A network administrator is managing an HP A-Series Wireless Access Controller at the command
line interface (CLI). The administrator issues a command to view the contents of the controller
flash directory. Looking at the output, which access point models can the controller boot and
command to view the contents of the controller? flash directory. Looking at the output, which
access point models can the controller boot and manage? (Select two.)
A. HP WA2220-AG
B. HP WA2612-AGN
C. HP WA2620-AGN
D. HP WA2610E-AGN
E. HP WA2620E-AGN
Answer: B,C

HP参考書   HP0-Y35   HP0-Y35問題集

NO.9 What are acceptable topologies for an IRF-Stack? (Select two.)
A. star
B. tree
C. daisy-chain
D. mesh
E. ring
Answer: C,E

HP練習問題   HP0-Y35練習問題   HP0-Y35認定試験

NO.10 Click the Exhibit button.
An IRF-stack is being built using HP A5800 switches, and IRF member 1 will be connected to IRF
member 2 using IRF-port 2. Which IRF-port should it be connected to?
A. 1
B. 2
C. 3
D. any
Answer: A

HP   HP0-Y35練習問題   HP0-Y35   HP0-Y35   HP0-Y35   HP0-Y35問題集

NO.11 You have been asked to deploy a guest wireless service within an A-Series solution in the
reception area of a marketing firm. The clients associated with the guest service should be
assigned to VLAN 10. In which view do you assign the VLAN to the wireless service?
A. System view
B. Service Template view
C. VLAN Interface view
D. ESS Interface view
Answer: D

HP問題集   HP0-Y35練習問題   HP0-Y35問題集   HP0-Y35

NO.12 After a MAD enabled IRF-stack splits, what happens to the part of the stack that entered Recovery
state?
A. All ports, except for the IRF-ports, BFD enabled ports, and console ports are shut down.
B. All ports, except for the IRF-ports, LACP enabled Link aggregation groups, console ports, and
manually excluded ports are shut down.
C. All ports, except for the IRF-ports, console ports, and manually excluded ports, are shut down.
D. All ports except for manually excluded ports are shut down.
Answer: C

HP   HP0-Y35認証試験   HP0-Y35問題集   HP0-Y35   HP0-Y35

NO.13 Given an HP A5800 switch that is in its factory default configuration, what happens after the
following command sequence? (Note: There is no save command.) system-view irf member 1
renumber 2 quit reboot
A. The IRF member ID will be 1.
B. The IRF member ID will be 2.
C. The IRF member ID will be assigned dynamically.
D. The IRF member ID will be "unknown."
Answer: B

HP   HP0-Y35   HP0-Y35   HP0-Y35認証試験   HP0-Y35

NO.14 Which sampling mechanisms are available in sFlow in A-Series switches and routers? (Select
two.)
A. packet-based
B. packet-length-based
C. time-based
D. ip-protocol-based
E. ip-source-address-based
F. mac-address-based
Answer: A,C

HP参考書   HP0-Y35認定試験   HP0-Y35   HP0-Y35認証試験   HP0-Y35認定証

NO.15 Click the Exhibit button.
You have recently upgraded the Comware of an HP A-Series Access Controller (AC). Prior to
rebooting the device, you issued the dir command to display the contents of the flash root
directory. Upon reboot, the AC does not successfully run the new version of firmware. What is the issue?
A. The device does not have enough memory to run the new firmware.
B. The filename of the firmware is incorrect.
C. The new firmware is not present in the root directory.
D. Thebootware of the device requires updating as well.
Answer: B

HP参考書   HP0-Y35   HP0-Y35過去問

JPexamは最新の300-208問題集と高品質の1z0-481問題と回答を提供します。JPexamのE20-555 VCEテストエンジンと98-375試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-619 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク：http://www.jpexam.com/HP0-Y35_exam.html

HP HP0-Y35 exam pdf dumps

Whole IT-Tests's pertinence exercises about HP certification HP0-Y35 exam is very popular. IT-Tests's training materials can not only let you obtain IT expertise knowledge and a lot of related experience, but also make you be well prepared for the exam. Although HP certification HP0-Y35 exam is difficult, through doing IT-Tests's exercises you will be very confident for the exam. Be assured to choose IT-Tests.com efficient exercises right now, and you will do a full preparation for HP certification HP0-Y35 exam.

The IT-Tests.com Free HP HP0-Y35 sample questions, allow you to enjoy the process of buying risk-free. This is a version of the exercises, so you can see the quality of the questions, and the value before you decide to buy. We are confident that IT-Tests.com the HP HP0-Y35 sample enough you satisfied with the product. In order to ensure your rights and interests，IT-Tests.com commitment examination by refund. Our aim is not just to make you pass the exam, we also hope you can become a true IT Certified Professional. Help you get consistent with your level of technology and technical posts, and you can relaxed into the IT white-collar workers to get high salary.

IT-Tests.com is a website which can give much convenience and meet the needs and achieve dreams for many people participating IT certification exams. If you are still worrying about passing some IT certification exams, please choose IT-Tests.com to help you. IT-Tests.com can make you feel at ease, because we have a lot of IT certification exam related training materials with high quality, coverage of the outline and pertinence, too, which will bring you a lot of help. You won't regret to choose IT-Tests, it can help you build your dream career.

Exam Code: HP0-Y35
Exam Name: HP (Wireless Networks - ASE 2011 Delta Exam)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 75 Questions and Answers
Last Update: 2013-09-06

I believe that people want to have good prospects of career whatever industry they work in. Of course, there is no exception in the competitive IT industry. IT Professionals working in the IT area also want to have good opportunities for promotion of job and salary. A lot of IT professional know that HP certification HP0-Y35 exam can help you meet these aspirations. IT-Tests.com is a website which help you successfully pass HP HP0-Y35.

HP0-Y35 (Wireless Networks - ASE 2011 Delta Exam) Free Demo Download: http://www.it-tests.com/HP0-Y35.html

NO.1 Click the Exhibit button.
When IRF with Distributed Link Aggregation is implemented at all layers of a LAN (Core,
Aggregation, and Access), which protocols can be replaced by IRF functions? (Select two.)
A. MSTP
B. LACP
C. BFD
D. NSF/GR
E. VRRP
Answer: A,E

HP   HP0-Y35 original questions   HP0-Y35

NO.2 Using HP A5800 switches, which element must be configured in all switches involved in Layer 2
remote port mirroring?
A. remote-mirroring group
B. mirroring-ingress port
C. monitor-egress port
D. remote-probe VLAN
Answer: D

HP demo   HP0-Y35   HP0-Y35 certification   HP0-Y35 test questions

NO.3 Click the Exhibit button.
An IRF-stack is being built using HP A5800 switches, and IRF member 1 will be connected to IRF
member 2 using IRF-port 2. Which IRF-port should it be connected to?
A. 1
B. 2
C. 3
D. any
Answer: A

HP demo   HP0-Y35 study guide   HP0-Y35   HP0-Y35 exam simulations   HP0-Y35   HP0-Y35 study guide

NO.4 Given an HP A5800 switch that is in its factory default configuration, what happens after the
following command sequence? (Note: There is no save command.) system-view irf member 1
renumber 2 quit reboot
A. The IRF member ID will be 1.
B. The IRF member ID will be 2.
C. The IRF member ID will be assigned dynamically.
D. The IRF member ID will be "unknown."
Answer: B

HP   HP0-Y35   HP0-Y35 study guide   HP0-Y35 study guide   HP0-Y35

NO.5 Which sampling mechanisms are available in sFlow in A-Series switches and routers? (Select
two.)
A. packet-based
B. packet-length-based
C. time-based
D. ip-protocol-based
E. ip-source-address-based
F. mac-address-based
Answer: A,C

HP test answers   HP0-Y35   HP0-Y35   HP0-Y35   HP0-Y35

NO.6 You have been asked to deploy a guest wireless service within an A-Series solution in the
reception area of a marketing firm. The clients associated with the guest service should be
assigned to VLAN 10. In which view do you assign the VLAN to the wireless service?
A. System view
B. Service Template view
C. VLAN Interface view
D. ESS Interface view
Answer: D

HP exam simulations   HP0-Y35   HP0-Y35 test questions

NO.7 In an IRF stack, which operational plane is centralized (in the Master) and which is distributed
(among all members)?
A. Management: centralized
Control: centralized
Forwarding: centralized
B. Management: distributed
Control: distributed
Forwarding: distributed
C. Management: centralized
Control: distributed
Forwarding: distributed
D. Management: distributed
Control: centralized
Forwarding: distributed
E. Management: centralized
Control: centralized
Forwarding: distributed
Answer: E

HP pdf   HP0-Y35 questions   HP0-Y35 pdf   HP0-Y35 exam   HP0-Y35 test answers   HP0-Y35

NO.8 You have been asked to deploy an additional HP A-Series wireless access point in the conference room
of an advertising agency. You connect to the CLI of the access controller and create an AP management
template. In which view do you specify the serial number of the access point?
A. Radio view
B. Service Template view
C. AP view
D. ESS Interface view
Answer: C

HP   HP0-Y35 test questions   HP0-Y35 exam prep   HP0-Y35 certification training   HP0-Y35 exam simulations

NO.9 Which roles are supported by the sFlow standard?
A. agent and collector only
B. probe and collector only
C. agent, collector, and analyzer
D. probe, collector, and analyzer
Answer: A

HP test answers   HP0-Y35 exam prep   HP0-Y35   HP0-Y35   HP0-Y35

NO.10 What are acceptable topologies for an IRF-Stack? (Select two.)
A. star
B. tree
C. daisy-chain
D. mesh
E. ring
Answer: C,E

HP   HP0-Y35   HP0-Y35

NO.11 Click the Exhibit button.
You have recently upgraded the Comware of an HP A-Series Access Controller (AC). Prior to
rebooting the device, you issued the dir command to display the contents of the flash root
directory. Upon reboot, the AC does not successfully run the new version of firmware. What is the issue?
A. The device does not have enough memory to run the new firmware.
B. The filename of the firmware is incorrect.
C. The new firmware is not present in the root directory.
D. Thebootware of the device requires updating as well.
Answer: B

HP exam   HP0-Y35 test answers   HP0-Y35 exam simulations   HP0-Y35 certification training   HP0-Y35

NO.12 After a MAD enabled IRF-stack splits, what happens to the part of the stack that entered Recovery
state?
A. All ports, except for the IRF-ports, BFD enabled ports, and console ports are shut down.
B. All ports, except for the IRF-ports, LACP enabled Link aggregation groups, console ports, and
manually excluded ports are shut down.
C. All ports, except for the IRF-ports, console ports, and manually excluded ports, are shut down.
D. All ports except for manually excluded ports are shut down.
Answer: C

HP   HP0-Y35 answers real questions   HP0-Y35 demo   HP0-Y35 practice test

NO.13 Which protocols/technologies can be used to implement IRF MAD? (Select two.)
A. NSF/GR
B. ICMP
C. IGMP
D. BFD
E. LACP
Answer: D,E

HP exam simulations   HP0-Y35   HP0-Y35 answers real questions   HP0-Y35 exam prep

NO.14 Click the Exhibit button.
A network administrator is managing an HP A-Series Wireless Access Controller at the command
line interface (CLI). The administrator issues a command to view the contents of the controller
flash directory. Looking at the output, which access point models can the controller boot and
command to view the contents of the controller? flash directory. Looking at the output, which
access point models can the controller boot and manage? (Select two.)
A. HP WA2220-AG
B. HP WA2612-AGN
C. HP WA2620-AGN
D. HP WA2610E-AGN
E. HP WA2620E-AGN
Answer: B,C

HP answers real questions   HP0-Y35 original questions   HP0-Y35   HP0-Y35   HP0-Y35

NO.15 Click the Exhibit button.
You have been asked to configure the switching engine of an HP A3000-24G PoE+ Wireless
Switch. First, you log in to the CLI of the access controller and then move to the System view. You
then attempt to issue the partial command oap co and use the Tab key to complete it. However,
the CLI does not complete the command but issues a line return instead, as shown in the exhibit.
What must you do to connect to the CLI of the switching engine?
A. Return to the User view and then issue the command.
B. Enter the OAP view and then issue the command.
C. Use the CTRL+K key combination to access the CLI of the switching engine.
D. Telnet directly to the IPaddress of the switching engine and issue the command.
Answer: A

HP   HP0-Y35   HP0-Y35   HP0-Y35

IT-Tests.com offer the latest C-TFIN52-64 Questions & Answers and high-quality 70-332 PDF Practice Test. Our DC0-260 VCE testing engine and CAT-500 study guide can help you pass the real exam. High-quality 70-463 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/HP0-Y35.html

Free download HP certification HP0-Y35 exam practice questions and answers

God is fair, and everyone is not perfect. As we all know, the competition in the IT industry is fierce. So everyone wants to get the IT certification to enhance their value. I think so, too. But it is too difficult for me. Fortunately, I found IT-Tests.com's HP HP0-Y35 exam training materials on the Internet. With it, I would not need to worry about my exam. IT-Tests.com's HP HP0-Y35 exam training materials are really good. It is wide coverage, and targeted. If you are also one of the members in the IT industry, quickly add the IT-Tests.com's HP HP0-Y35 exam training materials to your shoppingcart please. Do not hesitate, do not hovering. IT-Tests.com's HP HP0-Y35 exam training materials are the best companion with your success.

In this competitive IT industry, having some authentication certificate can help you promote job position. Many companies that take a job promotion or increase salary for you will refer to how many gold content your authentication certificates have. HP HP0-Y35 is a high gold content certification exam. HP HP0-Y35 authentication certificate can meet many IT employees' needs. IT-Tests.com can provide you with HP certification HP0-Y35 exam targeted training. You can free download IT-Tests's trial version of raining tools and some exercises and answers about HP certification HP0-Y35 exam as a try.

IT-Tests.com provide you with the comprehensive HP HP0-Y35 exam information to help you to succeed. Our training materials are the latest study materials which bring by experts. We help you achieve your success. You can get the most detailed and accurate exam questions and answers from us. Our Training Tools are updated in a timely manner in accordance with the changing of Exam Objectives. In fact, the success is not far away, go down along with IT-Tests.com, then you will come to the road to success.

IT-Tests.com has gained the reputation of the many certification industry, because we have a lot of high-quality HP HP0-Y35 Exam HP0-Y35 study guide, HP0-Y35 exam, HP0-Y35 exam answer. As the most professional supplier on the site of IT certification test currently , we provide a comprehensive after-sales service. We provide tracking services to all customers. Within one year of your purchase, enjoy free upgrades examination questions service. During this period, if HP's HP0-Y35 test questions are modified, We will be free to provide customers with protection. HP HP0-Y35 certification exam is carefully crafted by our IT-Tests.com IT experts. With the IT-Tests.com of HP HP0-Y35 exam materials, I believe that your tomorrow will be better.

IT-Tests.com can not only achieve your dreams, but also provide you one year of free updates and after-sales service. The answers of IT-Tests's exercises is 100% correct and they can help you pass HP certification HP0-Y35 exam successfully. You can free download part of practice questions and answers of HP certification HP0-Y35 exam online as a try.

Now it is a society of abundant capable people, and there are still a lot of industry is lack of talent, such as the IT industry is quite lack of technical talents. HP certification HP0-Y35 exam is one of testing IT technology certification exams. IT-Tests.com is a website which provide you a training about HP certification HP0-Y35 exam related technical knowledge.

We are committed to using IT-Tests.com HP HP0-Y35 exam training materials, we can ensure that you pass the exam on your first attempt. If you are ready to take the exam, and then use our IT-Tests.com HP HP0-Y35 exam training materials, we guarantee that you can pass it. If you do not pass the exam, we can give you a refund of the full cost of the materials purchased, or free to send you another product of same value.

Exam Code: HP0-Y35

Exam Name: HP (Wireless Networks - ASE 2011 Delta Exam)

HP0-Y35 (Wireless Networks - ASE 2011 Delta Exam) Free Demo Download: http://www.it-tests.com/HP0-Y35.html

NO.1 Click the Exhibit button.
You have been asked to configure the switching engine of an HP A3000-24G PoE+ Wireless
Switch. First, you log in to the CLI of the access controller and then move to the System view. You
then attempt to issue the partial command oap co and use the Tab key to complete it. However,
the CLI does not complete the command but issues a line return instead, as shown in the exhibit.
What must you do to connect to the CLI of the switching engine?
A. Return to the User view and then issue the command.
B. Enter the OAP view and then issue the command.
C. Use the CTRL+K key combination to access the CLI of the switching engine.
D. Telnet directly to the IPaddress of the switching engine and issue the command.
Answer: A

HP dumps   HP0-Y35   HP0-Y35

NO.2 What are acceptable topologies for an IRF-Stack? (Select two.)
A. star
B. tree
C. daisy-chain
D. mesh
E. ring
Answer: C,E

HP   HP0-Y35 dumps   HP0-Y35 original questions   HP0-Y35 certification   HP0-Y35

NO.3 You have been asked to deploy an additional HP A-Series wireless access point in the conference room
of an advertising agency. You connect to the CLI of the access controller and create an AP management
template. In which view do you specify the serial number of the access point?
A. Radio view
B. Service Template view
C. AP view
D. ESS Interface view
Answer: C

HP exam prep   HP0-Y35 demo   HP0-Y35   HP0-Y35 original questions   HP0-Y35 exam   HP0-Y35

NO.4 Click the Exhibit button.
You have recently upgraded the Comware of an HP A-Series Access Controller (AC). Prior to
rebooting the device, you issued the dir command to display the contents of the flash root
directory. Upon reboot, the AC does not successfully run the new version of firmware. What is the issue?
A. The device does not have enough memory to run the new firmware.
B. The filename of the firmware is incorrect.
C. The new firmware is not present in the root directory.
D. Thebootware of the device requires updating as well.
Answer: B

HP   HP0-Y35   HP0-Y35 test answers

NO.5 Given an HP A5800 switch that is in its factory default configuration, what happens after the
following command sequence? (Note: There is no save command.) system-view irf member 1
renumber 2 quit reboot
A. The IRF member ID will be 1.
B. The IRF member ID will be 2.
C. The IRF member ID will be assigned dynamically.
D. The IRF member ID will be "unknown."
Answer: B

HP answers real questions   HP0-Y35 exam prep   HP0-Y35   HP0-Y35

NO.6 After a MAD enabled IRF-stack splits, what happens to the part of the stack that entered Recovery
state?
A. All ports, except for the IRF-ports, BFD enabled ports, and console ports are shut down.
B. All ports, except for the IRF-ports, LACP enabled Link aggregation groups, console ports, and
manually excluded ports are shut down.
C. All ports, except for the IRF-ports, console ports, and manually excluded ports, are shut down.
D. All ports except for manually excluded ports are shut down.
Answer: C

HP test   HP0-Y35   HP0-Y35 demo   HP0-Y35

NO.7 Click the Exhibit button.
An IRF-stack is being built using HP A5800 switches, and IRF member 1 will be connected to IRF
member 2 using IRF-port 2. Which IRF-port should it be connected to?
A. 1
B. 2
C. 3
D. any
Answer: A

HP   HP0-Y35   HP0-Y35 test answers   HP0-Y35   HP0-Y35 test answers   HP0-Y35

NO.8 Which protocols/technologies can be used to implement IRF MAD? (Select two.)
A. NSF/GR
B. ICMP
C. IGMP
D. BFD
E. LACP
Answer: D,E

HP certification training   HP0-Y35   HP0-Y35   HP0-Y35

NO.9 Click the Exhibit button.
When IRF with Distributed Link Aggregation is implemented at all layers of a LAN (Core,
Aggregation, and Access), which protocols can be replaced by IRF functions? (Select two.)
A. MSTP
B. LACP
C. BFD
D. NSF/GR
E. VRRP
Answer: A,E

HP dumps   HP0-Y35 certification   HP0-Y35 practice test   HP0-Y35   HP0-Y35

NO.10 Which sampling mechanisms are available in sFlow in A-Series switches and routers? (Select
two.)
A. packet-based
B. packet-length-based
C. time-based
D. ip-protocol-based
E. ip-source-address-based
F. mac-address-based
Answer: A,C

HP   HP0-Y35   HP0-Y35   HP0-Y35 exam prep   HP0-Y35 test questions   HP0-Y35 test answers

NO.11 Click the Exhibit button.
A network administrator is managing an HP A-Series Wireless Access Controller at the command
line interface (CLI). The administrator issues a command to view the contents of the controller
flash directory. Looking at the output, which access point models can the controller boot and
command to view the contents of the controller? flash directory. Looking at the output, which
access point models can the controller boot and manage? (Select two.)
A. HP WA2220-AG
B. HP WA2612-AGN
C. HP WA2620-AGN
D. HP WA2610E-AGN
E. HP WA2620E-AGN
Answer: B,C

HP   HP0-Y35   HP0-Y35 exam dumps   HP0-Y35

NO.12 In an IRF stack, which operational plane is centralized (in the Master) and which is distributed
(among all members)?
A. Management: centralized
Control: centralized
Forwarding: centralized
B. Management: distributed
Control: distributed
Forwarding: distributed
C. Management: centralized
Control: distributed
Forwarding: distributed
D. Management: distributed
Control: centralized
Forwarding: distributed
E. Management: centralized
Control: centralized
Forwarding: distributed
Answer: E

HP   HP0-Y35 certification   HP0-Y35

NO.13 Which roles are supported by the sFlow standard?
A. agent and collector only
B. probe and collector only
C. agent, collector, and analyzer
D. probe, collector, and analyzer
Answer: A

HP   HP0-Y35   HP0-Y35   HP0-Y35

NO.14 You have been asked to deploy a guest wireless service within an A-Series solution in the
reception area of a marketing firm. The clients associated with the guest service should be
assigned to VLAN 10. In which view do you assign the VLAN to the wireless service?
A. System view
B. Service Template view
C. VLAN Interface view
D. ESS Interface view
Answer: D

HP test answers   HP0-Y35 study guide   HP0-Y35 certification training   HP0-Y35 exam dumps   HP0-Y35

NO.15 Using HP A5800 switches, which element must be configured in all switches involved in Layer 2
remote port mirroring?
A. remote-mirroring group
B. mirroring-ingress port
C. monitor-egress port
D. remote-probe VLAN
Answer: D

HP test answers   HP0-Y35 exam dumps   HP0-Y35 dumps   HP0-Y35 questions

IT-Tests.com has been to make the greatest efforts to provide the best and most convenient service for our candidates. High speed and high efficiency are certainly the most important points. In today's society, high efficiency is hot topic everywhere. So we designed training materials which have hign efficiency for the majority of candidates. It allows candidates to grasp the knowledge quickly, and achieved excellent results in the exam. IT-Tests.com's HP HP0-Y35 exam training materials can help you to save a lot of time and effort. You can also use the extra time and effort to earn more money.